Hygiene testing luminometer with LCD display ATP 1 KIT PCE Instruments

Product description:

• Luminometer for hygiene testing in a few seconds.
• It is self-calibrating every time it is switched on.
• The measured value is shown on the large LCD display after 10 seconds.
• It is used with test tubes (models PCE-ATP LIQ-SWAB and PCE-ATP SWAB), which allows rapid detection of micro-organisms or food residues on any surface.
  • With the cap included in the tube, it checks the surface.
  • The stopper is pushed to the bottom of the tube so that it comes into contact with the reagent liquid and the reagent itself.
  • The reagent liquid is collected in the reaction chamber of the tube by gentle shaking.
  • The test tube is completely inserted into the measuring chamber of the luminometer.
  • The measurement is then started. After 10 seconds, the result is shown in RLU (Relative Light Units) on the display of the luminometer.
• Quantitative determination of ATP (adenosine tri-phosphate) as well as AMP (adenosine mono-phosphate) is carried out in the product.
• It has a memory for 10,000 values.
• Two types of luminometer kits are available depending on the test tubes included:
  • Luminometer for water(PCE-ATP-KIT2 for water).
  • Luminometer for surfaces and water(PCE-ATP-KIT3 for surfaces and water).
• Included in delivery:
  • Luminometer PCE-ATP 1-KIT2 or PCE-ATP-KIT3, as appropriate.
  • 3.7V, 2300 mAh Li-Ion rechargeable battery.
  • USB cable.
  • USB charger.
  • Carrying bag.
  • PCE-ATP LIQ-SWAB test tubes (100 units) (for water) or PCE-ATP SWAB test tubes (100 units) (for surfaces) + PCE-ATP LIQ-SWAB test tubes (100 units) (for water).
  • Instruction manual.

Technical data:

• The detection method is analogue integration by means of photodiodes.
• The magnitude used is RLU (Relative Light Unit).
• Background noise of ± 5 RLU.
• Range 0 to 999999 RLU.
• Measuring time 10 seconds.
• Detection limit 10-16 mol/ATP/test.
• Memory of 256 users and 10,000 records.
• Ambient conditions +5 to +40 °C and 20 to 80 % RH.
• Storage conditions -10 to +40 °C and max. 60 % RH.
• Operating time:
  • Operating: 10 h.
  • Standby: 600 h.
• Dimensions are 70 mm wide, 189 mm high and 35 mm.
• The approximate weight is 280 g.

Optional

• Luminometer for water(PCE-ATP-KIT2).

• Luminometer for surfaces and water(PCE-ATP-KIT3).

Options to choose from::