12 V and 24 V to 230 A Combiner for Cyrix-Li-ct Lithium batteries Victron Energy

Product description:

• This is a microprocessor reinforced relay for lithium batteries, model Cyrix-Li-ct.
• It connects the batteries in parallel when one of them reaches the preset voltage.
• It disconnects them when the voltage drops below the float level.
• It is an excellent substitute for diode bridges.
• There is virtually no voltage loss, so the output voltage of alternators or battery chargers does not need to be increased.
• It will connect in parallel a lead-acid starter battery and a LiFePO4 battery in case the disconnection of the VE.Bus BMS charger is high and if 13.4 V or more is reached at any of its terminals.
• If the control output becomes floating (overvoltage or overtemperature of the cells) or the battery voltage drops below 13.2 V, the relay will disconnect.
• With StartAssist function that provides a short negative pulse will close the relay for thirty seconds.
• With built-in transient voltage suppressor.
  • It will limit the voltage spike in case the Cyrix suddenly switches off.
• Features a status indicator LED.
• With cut-off capacity (at 12 and 24 V) and 230 A continuous current capacity.
• The cut-off capacity at 48 V is 80 A.
• When open, its power consumption is
• It has an IP54 degree of protection.
• It measures 100 mm wide, 65 mm high and 50 mm deep.
• With 1 metre control cable included.