12V and 24V at 120A for Victron Energy Cyrix-Li-Load lithium-ion battery packs

Product description:

• This is a microprocessor reinforced relay for lithium batteries, model Cyrix-Li-Load.
• It connects the batteries in parallel when one of them reaches the preset voltage.
• It disconnects them when the voltage drops below the float level.
• It is an excellent substitute for diode bridges.
• There is virtually no voltage loss, so the output voltage of alternators or battery chargers does not need to be increased.
• It is ideal for use with a Victron BMS.
  • When the control input goes to float this relay will switch off.
  • The BMS output will be high and the Cyrix will switch on after thirty seconds.
  • After switching on three times, the Cyrix will deactivate until the voltage rises above 13V for thirty seconds.
• With cut-off capacity (at 12 and 24 V) and 120 A direct current capacity.
• The cut-off capacity at 48 V is 40 A.
• When open, its power consumption is
• It has an IP54 degree of protection.
• It measures 46 mm wide, 46 mm high and 80 mm deep.