Two-component pack of epoxy and polyurethane enamel with white gloss finish Proa

Product description:

• Two-component epoxy and polyurethane enamel pack, based on aliphatic polyisocyanate and polyacrylate resins, with cold curing by chemical reaction.
• This enamel is very hard.
• It is resistant to solvents and chemicals.
• It has excellent mechanical properties.
• Its finish has a porcelain shine of very good quality.
• It has the peculiarity of being dust-proof, and it has a UV filter.
• Due to its light stability and resistance to the elements, it is suitable for both indoors and outdoors.
• Its colour is white.
• For use on metal, concrete, floors and galvanised paint.
• Suitable for industrial and marine applications.
• It has a drying time of 2 hours and a recoating time of 24 hours.
• Its coverage is 8 to 11 m²/l per coat.
• Its density is 1.15 gr/cm³.
• It is recommended for use with roller, brush, spray gun or "air-less"
  • It is important to consider the pot life of the mixture and its drying time.
  • Ventilate during application and drying.
  • Shake before use.
• For use with spray gun, dilute for 25 to 30 seconds with approximately 20% Proadyx Lacquer Thinner (DL-000) in Ford Cup No. 4.
• For use with brush, if necessary dilute maximum 10% Proadyx 9100 thinner (DK-000).

Optional:

• Its format is one 750 ML can and one 120 ML can, 4 L + 0.6 L or 10 L + 1.5 L.

Options to choose from::