Three-phase wattmeter and power ammeter with current clamp 360 PCE Instruments

Product description:

• Three-phase wattmeter and power ammeter (real-time).
• It is used to measure the power in one or three phases.
• The 4-digit LCD display shows up to 10 values.
• Up to four current clamps can be adapted at the same time.
• It has an automatic switch-off function after 30 minutes of inactivity.
• It has a 4 GB SD card for data logging.
  • In manual mode, it can store up to 99 values.
  • In data logging mode, it stores up to 20000 values (512K memory). Ideal for long-term analysis.
• The waveform can be observed via the software.
• With USB interface, so all values can be transferred to the PC.
• The sampling rate is 1/s.
• Maximum voltage between current and neutral inputs is 1000 Vrms.
• The maximum cable diameter when using the current clamps is Ø 42 mm.
• Power is supplied by eight 1.5 V AA batteries.
  • The battery life is approximately 50 hours.
• It is supplied with a 12 V, 300 mA adapter.
• The product is delivered factory calibrated.
• The operating conditions are:
  • 0 to +40 °C <80 % Relative humidity (up to +31 °C)
  • <50 % relative humidity (+32 to +40 °C).
• The temperature coefficient is 0,1 * (corresponding accuracy) / °C (< +18 o > +28 °C).
• The storage conditions are -10 to +60 °C<70 % relative humidity, non-condensing.
• The dimensions of the measuring device are 117 mm wide, 235 mm high and 54 mm deep.
• The dimensions of the current clamps are 88 mm wide, 193 mm high and 40 mm deep.
• Product weight with batteries 730 g.
• Weight of tweezers 333 g.
• Delivery includes:
  • One PCE-360 three-phase power meter.
  • Four current clamps (1, 2, 3, 4 with 3 m cable length; 1000 A AC, clamp opening 40 mm).
  • Four alligator clips (blue, yellow, red and black, cable length 3 m).
  • Four test leads.
  • Eight 1.5 V batteries, type AA 1.
  • CD-ROM software and USB interface.
  • Carrying bag.
  • Mains adapter (110 V to 12 V; 220 V to 12 V).
  • Instruction manual.

Technical data:

• AC Voltage measurement.
  • Measuring range: 50 to 600.0 V actual value.
  • Resolution is 0.1 V.
  • Accuracy is ±1.5 % measured value + 10 digits.
  • The input resistance is 2 MΩ.
  • Overload protection is 1000 V rms.
  • Nominal mains frequency is 45 to 66 Hz.

• AC Current measurement.
  • Measuring range is 3 to 999.9 A real effective value.
  • Resolution is 0.1 A.
  • The accuracy (incl. current clamp) is ±1.5 % measured value + 15 digits.
  • Current clamp output signal is 0.35 mV/A.
  • The overload protection is 1000 A rms.
  • Nominal mains frequency 45 to 66 Hz.

• Effective power P.
  • Measuring range 150 W to 999.9 kW.
  • Resolution is 0.1 kW.
  • Accuracy is ±1.5 % measured value + 20 digits.

• Apparent power S.
  • Measuring range is 150 VA to 999.9 kVA.
  • Resolution is 0,1 kVA.
  • Accuracy is ±1.5 % measurement value ± 20 digits.

• Reactive power Q.
• • Measuring range is 150 var to 999.9 kVar.
  • Resolution is 0,1 kvar.
  • Accuracy is ±1.5 % measurement value ± 20 digits.

• Power factor (cos Φ).
  • Measuring range 0 to +1.
  • Resolution 0,001.
  • Accuracy ±0.06.

• Phase angle (Φ).
  • Measuring range -90° to +90°.
  • Resolution 0,1°.
  • Accuracy ± 3°.

• Frequency measurement (U > 50V).
  • Measuring range 40 to 100 Hz.
  • Resolution 0.1 Hz.
  • Accuracy ±0.1 % measurement value +2 digits.
  • Measurement source is voltage U1 > 10 V.

• Measurement of phase rotation (UL > 50V).
  • Input voltage range 3P > 10 V.
  • Normal direction of phase rotation is clockwise.
  • Reverse direction of phase rotation is counterclockwise.
  • Measurement sources are U1, U2 and U3.

• Effective energy or work measurement.
  • Measuring range and resolution are 0 to 9999 MWh.
  • Accuracy of ±1,5 % measurement value +20 digits.
  • Timer interval is 1 second.
  • Timer accuracy is ±50 ppm (25° C / 77° F).

• Measurement of apparent energy or work.
• • Measurement range and resolution is 0 to 9999 MVAh.
  • Accuracy of ±1,5 % measurement value +20 digits.
  • Timer interval is 1 second.
  • Timer accuracy is ±50 ppm (25° C / 77° F).

• Measurement of reactive energy or reactive work.
• • Measurement range and resolution is 0 to 9999 MVArh.
  • Accuracy of ±1.5 % measurement value +20 digits.
  • Timer interval is 1 second.
  • Timer accuracy is ±50 ppm (25° C / 77° F).

• Harmonic measurement.
  • Order from 1 to 63.
  • Accuracy is ±3 % THD.
  • Measurement source is U1, U2, U3 > 10 and V I1, I2, I3 > 3 A.

SKU: 4250348700353