Insulation tester PCE-ITM 20 PCE Instruments

Product description:

• This is a device that integrates a multimeter and an insulation tester.
• Range selection is automatic.
• It integrates insulation, capacitance, temperature and frequency measurement.
• It has a large backlit LCD display.
• Hold function.
• Delivery includes:
  • Ohmmeter.
  • Set of test leads.
  • 1 Alligator clip with cable.
  • 1 Thermocouple adapter.
  • 1 Thermocouple type K.
  • 6 1.5 V batteries, type AA.
  • Instruction manual.

Technical data:

• The memory capacity is 9999 values.
• The housing is double and resistant to water and dust.
• Drop test is 2 m.
• Peak value detection is > 1 ms.
• Temperature sensor: Thermocouple type K.
• Input impedance:
  • DC voltage: > 10 MΩ.
  • AC voltage: > 9 MΩ.
• AC coupling: TRMS.
• AC voltage bandwidth is 50 Hz to 1 kHz.
• Crest factor:
  • <3 at 500 V.
  • < 1.5 at 1000 V.
• The display is a 50000-digit LCD with bar graph, backlit.
• The device switches off after 15 minutes of inactivity.
• The measurement/update rate on the display is 10 Hz.
• Power is supplied by 6 x 1.5 V AA batteries.
• Operating conditions are from 5 to 40° C.
• Storage conditions are from -20 to 60° C.
• Operating altitude is 2000 metres maximum.
• Weighs approximately 720 grams.
• Measures 9 cm wide, 22 cm high and 5 cm deep.