Analyser for electrical quantities in single-phase and three-phase alternating current networks PCE Instruments

Product description:

• Three-phase ammeter, energy meter and harmonic analyser.
• It is used to measure one to three phases of electrical quantities in the alternating current network. It performs network analysis of:
  • 3 phases / 4 conductors.
  • 3 phases / 3 conductors.
  • 1 phase / 2 conductors.
  • 1 phase / 3 conductors.
• True-rms measurement: V 123 and I 123.
• Active power measurement: W, KW, MW, GW.
• Current measurements: from 0.1 mA to 3000 A.
• LCD display shows up to 35 parameters simultaneously.
• Indicates current and voltage waveforms in a superimposed manner.
• 512 KB memory with programmable recording intervals (measurement rate from 2 to 3000 seconds, 17,470 values on 3 phases / 4 conductors).
• Displays waveforms, performance parameters and harmonic distortions.
• Average power: AD in W, KW, MW.
• Maximum power: MD in W, KW, MW with programmable period.
• Harmonic distortion analysis: up to 99th order of curvature.
• The USB port is optically isolated.
• Integrated timer and calendar for data logging.
• Delivery includes:
  • Carrying case.
  • USB cable for PC
  • Software (English).
  • Instructions for use.
  • Wattmeter.
  • 3 Current clamps according to the set (PCE-6801, PCE-6802 or PCE-3007).
  • 4 insulated socket terminals.
  • 4 x 3 m safety test leads.
  • 8 batteries.
  • Mains adapter.

Technical data:

• Power is supplied by 8 x 1.5 V AA size batteries.
• Measures 15.5 cm wide, 25.7 cm high and 5.7 cm deep.
• Weighs 1.16 kg.
• Conditions are - 10 to 50° C and a maximum of 85 % relative humidity.
• Protections/regulations: IEC 61010, 600 V/CAT III.

Optional:

• Model PCE-830-1 (photo A):
  • Includes three clamp ammeters up to 100 A.
  • They weigh 200 g.
  • The range selection is manual, 1 A, 10 A or 100 A.
• Model PCE-830-2 (photo B).
  • Includes three clamp ammeters up to 1000 A.
  • They weigh 600 g.
  • The range selection is manual, 10 A, 100 A or 1000 A.
• Model PCE-830-3 (photo C).
  • Includes three clamp ammeters up to 3000 A.
  • They weigh 410 g.
  • They are flexible and have a minimum bending radius of 35 mm.
  • The length of the electrical conductor is 610 mm, and its diameter is 14 mm.
• Model with ISO calibration certificate for models PCE-830-1, PCE-830-2 and PCE-830-3.
  • The ISO ICA certificate is a custom calibration with nominal certificate.
  • When ordering, please contact the customer service team and indicate the calibration information required.
  • Calibration service is non-returnable.

SKU: 4250348700407, PCE-830-1, PCE-830-1-ICA, PCE-830-2, PCE-830-2-ICA, PCE-830-3, PCE-830-3-ICA

• Model : PCE-830-1, PCE-830-2, PCE-830-3.
• Optional Add-ons : Without optional accessories, ISO calibration certificate.