Aparici 30-litre electric boiler with digital panel and bipositional installation SC030T Aparici

Product description:

• Electric boiler with a capacity of 30 litres, extra-flat and suitable for small spaces.
• It has reinforced expanded polyurethane insulation.
• Outer body made of painted steel and upper and lower cover in ABS.
• It has two tanks made of high-strength vitrified steel connected in series, guaranteeing maximum hot water production.
• It can be installed either vertically or horizontally with the pipes to the left.
• Includes a double magnesium anode.
• Front panel with digital thermometer, temperature selection and operating mode.
• Fault diagnostics.
• Safety valve set at 7.5 bar supplied with the appliance.
• 3 operating modes: SMART function, degree-by-degree thermometer and fault diagnosis.
• Three operating modes: output tank (1200W), double tank (1200W in the output tank and 800W in the input tank), Smart (fully automatic).
  • Two submerged armoured AISI316 enamelled stainless steel heaters with low surface charge, one in each tank, 1200W in the outlet tank and 800W in the inlet tank.
• Energy efficiency class 'A'.
• The thermos measures 47 cm wide x 28.2 cm deep x 57.5 cm high.
• Its weight is 18.63 kg.

Technical data:

• Electrical characteristics:
  • Voltage/Frequency: 220-240 V 50/60 Hz.
  • Power (w): 2000 (800+1200).
  • Electrical insulation: Class I.
  • Degree of protection: IPX4.
  • Thermostat regulation temperature (ºC): 75.
  • Type of regulation thermostat: PTC probe.
  • Type of safety thermostat: bulb.
  • External regulation: electronic.
  • Thermometer: digital.
  • Type of water heating from 15 to 75 Cº: 1 h 10 m.
  • Type of heating element: submerged armoured.
• Hydraulic characteristics:
  • Nominal pressure: 7.5 bar.
  • Valve pressure: 8.5 bar.