Adler NL35 stainless steel industrial dishwasher with 35x35 cm basket and anti-humidity controls

Product description:

• This single-phase dishwasher from Adler is ideal for professional use in catering and gastronomy.
• It has a 32 mm diameter drain and is compatible with 3/4" inlet connections.
• It has a ball lock with micro switch, moisture-protected controls and a rinse aid dispenser.
• With its fixed washing cycle of 120'' it can wash 30 baskets per hour.
• It has pre-installation for detergent inlet with inlet in the tank and FASTON type inlet.
• Its rinsing and washing arms are made of food grade PVC and fibreglass.
  • They are easily removable.
  • Both washing and rinsing are done from the bottom and the top.
• It is resistant to chemicals.
• From 2 bars of pressure, its lower weight (249 g) guarantees the quality of rinsing.
  • The leaf-shaped water outlet also contributes to the rinsing.
• Its guides are removable.
• It has a dFilter filtering system.
  • Guarantees the cleanliness of the wash water.
  • The double and partial filtration on the outer surface allows the filtration of large dirt particles.
  • Microfiltration on the inner surface takes care of the smallest particles.

Technical data:

• The dishwasher has the following features.
  • Its dimensions are 45 cm wide, 66.2 cm high and 46.5 cm deep.
  • Its productivity is 30 baskets/h (120").
  • The tank has a capacity of 9 litres.
    • It operates at 55 °C.
    • Its resistance is 2 kW.
  • The boiler has a capacity of 3 litres.
    • It operates at 85 °C.
    • Its resistance is 2.4 kW.
  • Its water consumption is 1.5 litres per cycle.
    • The permissible water inlet pressure is 2 to 4 Bar.
  • The power of the washing pump is 0.20 kW - 0.3 HP.
  • The maximum consumption of this dishwasher is 2.8 kW.
    • It operates with 230 V/1N voltage.
• The optional water softeners have the following features.
  • Important: The installation of water softeners is recommended in cases where the supplied water exceeds a hardness of 15 °dH.
    • They allow an optimal functioning of the machinery.
    • They prevent limescale build-up and the problems associated with it.
  • They have a 3/8" connection.
  • All water softeners have a diameter of Ø 18.5 cm.
    • The 8-litre water softener is 40 cm high and can hold up to 5.8 litres of resin.
    • The 12-litre water softener is 50 cm high and can hold up to 9 litres of resin.
• The optional booster pump kit has the following features.
  • It has an 8 μF condenser.
  • Both its inlet and outlet are Ø 12 mm in diameter.
  • It operates with a power of 0.32 Kw.
    • Its supported voltage is 230 V.
    • The working frequency is 50 Hz.
• The optional detergent dispenser kit has the following characteristics.
  • It operates with a power of 230 V.
    • Its working frequency is 50 to 60 Hz.
  • It has a regulator from 0 to 3 l/h.
  • A mounting kit is included.

Optional:

• You can choose this product with the following optional extras.
  • Discharge pump.
  • Manual water softener.
    • 8 litres.
    • 12 litres.
  • Pressure booster pump kit.
  • Detergent dispenser kit.

Options to choose from::