Signal converter for rail mounting PCE Instruments

Product description:

• Signal converter for DIN rail mounting.
• It is a product that accepts signals of:
  • MA and Vdc processes.
  • Thermocouples type K, J, N, E, T, R, S, B.
  • Resistive temperature probes type Pt100, Pt500, Pt1000, Ni100, Ni200, Ni1000, PTC and NTC.
  • Resistors and potentiometers.
• It has the following functions:
  • Alarms.
  • Display filters.
  • Brightness.
  • Password.
• It is an ideal product for machine manufacturers, integrators and commercials.
• The product is configured by means of codes.
• It is a product that can be mounted on a rail.
• The product measures 2.25 cm wide x 10.6 cm high x 10.8 cm deep.

Technical data:

• Signal ranges:
  • 4/20 mA, 0/10 Vdc processes (active and passive).
  • Thermocouples type J, K, N, E, T, R and S.
  • Pt, Ni, NTC type probes.
  • Resistors of 100 K, 50 K, 25 K, 10 K, 5 K and 2.5 K.
  • Nominal value potentiometers between 500 Ohm and 20 KOhm.
• Output signal range:
  • In mA 4/20 mA active, max. 22 mA, min. 1.5 mA, max. load < 400 Ohm 4/20 mA passive, max. 30 Vdc at terminals.
  • In Vdc 0/10 Vdc, max. 11 Vdc, min. -1 Vdc, min. load > 1 KOhm. > 1 KOhm.
• Two-digit seven-segment display, 5 mm high, red
• Keypad with two push buttons.
• Vexc. power supply output +15 Vdc configurable on terminal 5.
• Universal power supply from 18 to 265 V AC (50/60Hz)/DC.
• Consumption less than 1.0 W.
• IP 30 protection.
• IK06 impact protection.
• Standard DIN rail mounting.
• Operating temperature 0 to 50 °C.
• Storage temperature from -20 to 70 °C.
• Warm-up time 15 minutes.
• Product weight 150 g.