Force and weight transducer with digital panel DPD-F1 PCE Instruments

Product description:

• Transducer with indicator panel that measures the correct force and weight in load cells, with modular design.
• Displays the detected numbers on a 6-digit, 7-segment LED display 1.4 cm high in red.
• Features 3 possible measuring speeds, memory and alarm.
• Functions:
  • Tare.
  • Auto tare.
  • Maximum tare.
  • Scale factor: scaling of the display without readjusting the cell parameters.
  • Stock pieces: counts the units.
  • 50 or 60 Hz: for fast measurement.
• The supply voltage can be between 5 V and 10 V. Depending on the chosen one, you can connect 4 or 8 load cells to the indicator.
• The dimensions are 9.6 cm width x 4.8 cm height x 9.1 cm depth.

Technical data:

• Signal ranges:
  • 0 to 100 mV DC, with sensitivity of 20 mV/V at 5 V and 10 mV/V at 10 V.
  • 0 to 30 mV DC with sensitivity of 6 mV/V at 5 V and 3 mV/V at 10 V.
  • 0 to 20 mV DC with sensitivity of 4 mV/V at 5 V and 2 mV/V at 10 V.
  • 0 to 15 mV DC with sensitivity of 3 mV/V at 5 V and 1.5 mV/V at 10 V.
  • 0 to 10 mV DC with sensitivity of 2 mV/V at 5 V and 1 mV/V at 10 V.
  • 0 to 5 mV DC with a sensitivity of 1 mV/V at 5 V and 0.5 mV/V at 10 V.
• Accuracy at 25 °C: ± 0,05 % FS.
• Input type: mV/V with maximum voltage of 30 V for all ranges.
• Maximum current: 140 mA.
• Load cells allowed: 1 to 8 load cells at 5 V / 1 to 4 load cells at 10 V.
• Units of measurement: g, kg, t, pcs, pcs, mg, lb, N, kN.
• Display range: 0 to -199999 to 999999 with adjustable decimal point.
• Acquisitions per second:
  • 16 Hz / 63 ms
  • 50 Hz / 20 ms
  • 60 Hz / 17 ms.
• Power supply type: 85-265 V AC/DC.
• To be able to use the panel it is necessary to preheat it for at least 15 minutes.