Hover over the image to zoom in
High performance thermal paste for CPU and GPU 8 g 14.6 W/mK grey operating range -30 to 150 °C NOX
Brand: NOX - NXTHERMAFLOW
Sold by: Habitium
At Habitium, all orders are sold and managed directly by us, so you will never have to deal with third-party sellers.
Product details
- Purpose: This high-performance thermal paste is designed to transfer heat generated by the CPU or GPU to the cooling system, helping to maintain effective heat dissipation.
- Pack size: The 8 g value pack is intended for system integrators, PC builders and technical service providers, with enough paste for up to 3 systems according to the manufacturer.
Payment methods and financing
Ask a question about this product
Average response time: 4 working hours
Product details - High performance thermal paste for CPU and GPU 8 g 14.6 W/mK grey operating range -30 to 150 °C NOX
- Purpose: This high-performance thermal paste is designed to transfer heat generated by the CPU or GPU to the cooling system, helping to maintain effective heat dissipation.
- Pack size: The 8 g value pack is intended for system integrators, PC builders and technical service providers, with enough paste for up to 3 systems according to the manufacturer.
- Compatibility: Suitable for applying or replacing thermal paste on compatible processors and graphics processing units.
- Thermal conductivity: The thermal conductivity of 14.6 W/m·K helps transfer heat from the component surface to the cooling system.
- Electrical conductivity: The paste is non-electrically conductive, preventing the flow of current through it under the specified conditions of use.
- Thermal impedance: The manufacturer specifies a value of ≤ 0.001 (°C·in²)/W as a measure of resistance to heat transfer.
- Physical properties: The compound has a density of 2.1 g/ml and a viscosity of 80 to 85 Pa·s at 20 °C, which define its physical behaviour during application.
- Electrical properties: The specified values are a permittivity of 1.8 at 106 Hz and a volume resistivity of 2.0 x 10¹³ Ohm·cm.
- Operating temperature: The specified operating temperature range is -30 to 150 °C.
- Colour: Grey for a discreet appearance on the component surface.
- Dimensions: 0.28 x 35 x 35 cm (length x width x height), as stated in the product dimensions.
- Accessories included: A precision applicator, spatula and two cleaning wipes. The applicator helps dispense the compound, while the spatula makes it easier to spread or remove during installation and maintenance.
SKU: 8436587976407, NXTHERMAFLOW