Drill bit sharpening guide Tormek

Product description:

• 4-sided cutting assembly. The thrust force required is reduced compared to a normal cone point drill.
• Generates less heat, which prolongs the life of the drill.
• Adjustable point and angle of attack setting with respect to the requirements of each sharpening, taking into account the size and composition of the bit to be processed.
• Complete restoration of used drills in good condition or broken and damaged drills is possible, thus bringing them to a perfect sharpness.
• The sharpening of a drill bit with the Tormek system lasts up to 4 times longer than with the conventional system. The user has complete control over the entire process and can analyse the sharpening at every step.
• Any angle between 90° and 150° can be set.
• The exit angle can be set according to the drilling requirements: 7°, 9°, 11° or 14°.
• All drill bits from 3 mm to 22 mm can be sharpened. No need to change the chuck.
• Approx. weight: 1.20 kg.