Factory Prices

Free Shipping!

Customer Service Award

Victron Energy BlueSmart IP22 BlueSmart IP22 12V 15A smart wireless battery charger in blue aluminium

Hover over the image to zoom in

Victron Energy BlueSmart IP22 BlueSmart IP22 12V 15A smart wireless battery charger in blue aluminium
Victron Energy BlueSmart IP22 BlueSmart IP22 12V 15A smart wireless battery charger in blue aluminium

Victron Energy BlueSmart IP22 BlueSmart IP22 12V 15A smart wireless battery charger in blue aluminium

Victron Energy - BPC121545102
€215.86 RRP -21%
€169.10 VAT included

€137.48 VAT not included

Discontinued product

Product details

  • This is a wireless battery charger.
  • It can be used in devices and motor vehicles, such as cars, motorbikes, boats and motorhomes.

Payment methods and financing

PayPal Visa MasterCard Maestro American Express Wire Transfer

Ask a question about this product Average response time: 4 working hours

Product details - Victron Energy BlueSmart IP22 BlueSmart IP22 12V 15A smart wireless battery charger in blue aluminium

Product description:

  • This is a wireless battery charger.
  • It can be used in devices and motor vehicles, such as cars, motorbikes, boats and motorhomes.
  • With Bluetooth Smart system.
    • Ideal for monitoring voltage and current.
    • Change settings and update the charger when new functions become available.
  • Up to 94% efficient.
  • Generates four times less heat.
  • Once the battery is charged, power consumption is reduced to 0.5 V.
  • With fully programmable six-stage variable charging algorithm.
    • Initial charge.
    • Absorption.
    • Reconditioning.
    • Flotation.
    • Storage.
  • Adaptive, microprocessor-controlled battery management.
    • This adaptive function will optimise the charging process according to the use of the battery.
  • The temperature compensation value can be adjusted.
  • In expert mode, the application will allow changing almost all parameters and time limits.
  • It has a storage mode that is activated when the battery is not in use.
    • At this time the float voltage is reduced to 2.2 V/cell (13.2 V for 12 V batteries) to reduce gassing and corrosion of the positive plates.
    • This mode is activated when the battery has not been discharged for 24 hours.
    • Once a week, the voltage is raised to the absorption level to equalise the battery. This prevents electrolyte stratification and sulphation.
  • It can charge lithium-ion batteries.
  • It will charge even if the battery has been discharged to 0 volts.
  • With the internal disconnect function, it will reconnect to a fully discharged lithium-ion battery.
  • Night and Low mode can be set.
    • When active, the output current is reduced to a maximum of 50 % of the nominal output, which will make it completely silent.
    • Night mode is automatically terminated after eight hours.
    • Low mode can be terminated manually.
  • It is protected against overheating.
    • As the temperature rises (up to 50°C) the output current is reduced.
  • Equipped with eleven LED status indicator lights.
  • With historical record of forty cycles in the history.
  • With the possibility of connecting to a VE.Smart wireless device-to-device communication network (between Victron products).
    • Up to ten battery chargers can be synchronised in a VE.Smart network.
  • Nominal voltage is 12 V.
  • The input voltage range is 180-265 Vac.
  • The charging current in normal mode is 15 A.
  • Charging current in Night or Low mode is 7.5 A.
  • Frequency 45-65 Hz.
  • It has one output.
  • Absorption charge voltage of 14.4 V in normal mode.
  • Float charge voltage of 13.8 V in normal mode.
  • Storage charge voltage of 13.2 V in normal mode.
  • Features battery reverse polarity protection.
  • Operates in a temperature range of -20 to 50°C.
  • Made of aluminium housing with blue finish.
  • Its dimensions are 108 mm wide, 235 mm high and 65 mm deep.
  • The connection to the battery is by means of 16 mm² screw terminals.
  • Connection to 230 Vac is via a 1.5 m cable with CEE 7/7 plug.
  • It has IP22 degree of protection.
  • Weighs 1.3 kg.
  • Safety standard EN 60335-1, EN 60335-2-29.

Product classification::

This product belongs in the category Chargers and Jumper Cables: for batteries, portable, wireless, smart.

SKU: BPC121545102

Safety Resources and Products

Information and contacts