Hot-wire anemometer with optional calibration certification 009 PCE Instruments

Product description:

• This is a device used to measure air velocity and temperature, directly displaying the volumetric flow rate of air.
• The values obtained can be stored and then transferred for analysis.
• The housing is made of ABS plastic.
• Included:
  • 1 LCD display 58 x 34 mm.
  • Carrying case with 4 x 1.5 V batteries.
  • RS-232 interface cable.
  • Software.
  • Instruction manual.
• Automatically switches off after 5 minutes of non-use.
• The external wheel is connected to a 1.5 m cable.

Technical data:

• The measuring range is:
  • 0.2 to 20 m/s.
  • 0 to 50 °C.
• Resolution detail:
  • Air velocity is 0.01 for all units, up to ft/min = 1.
  • The air temperature is 0.1 °C.
  • The air volume flow rate is 0.001 to 1 m³/min (depending on the measuring range).
• Accuracy detail:
  • Temperature is 0.8 °C.
  • Air velocity is less than 4 m/s = ±0,3 m/s, greater than 4 m/s = 5 % of the measured value + 0,1 m/s.
  • The volumetric air flow rate is at the calculated value.
• The measurement rate is from 2 seconds to 9 hours.
• The calculated value for the air flow volume is from 0 to 36.

Optional:

• Model with ISO calibration certificate.
  • The ISO ICA certificate is a custom calibration with nominal certificate.
  • When ordering, please contact the customer service team and indicate the calibration information required.
  • Calibration service is non-returnable.

Options to choose from::