Hover over the image to zoom in
Bathroom extractor fan white ABS 100 mm 90 m³/h timer non-return valve IP45 ceiling wall Vortice
Brand: Vortice - 11314
Sold by: Habitium
At Habitium, all orders are sold and managed directly by us, so you will never have to deal with third-party sellers.
Product details
- Power and current: 9 W with an approximate current consumption of 0.052 A; designed to extract air from compact spaces while keeping electricity consumption low.
- Extraction rate: 90 m³/h, providing the required air renewal in installations compatible with its technical specifications.
Payment methods and financing
Ask a question about this product
Average response time: 4 working hours
Product details - Bathroom extractor fan white ABS 100 mm 90 m³/h timer non-return valve IP45 ceiling wall Vortice
- Power and current: 9 W with an approximate current consumption of 0.052 A; designed to extract air from compact spaces while keeping electricity consumption low.
- Extraction rate: 90 m³/h, providing the required air renewal in installations compatible with its technical specifications.
- Sound pressure: 26.9 dB(A) at 3 m, measured using A-weighting, a standard reference for assessing perceived noise.
- Nominal connection size: 100 mm, as specified by the manufacturer for the connection or nominal section of the unit.
- Timer: The delay relay function, identified by the letter T, keeps the fan running for a period after activation; the delay time is not specified.
- Non-return valve: Integrated valve helps prevent air from flowing back through the duct when the extractor is not running.
- Motor bearings: The LL specification indicates that the motor is mounted on ball bearings.
- Thermal protection: Includes protection designed to prevent damage caused by thermal overloading of the motor.
- Power supply: 230 V and 50 Hz; connect to an electrical installation with these voltage and frequency values.
- Maximum operating temperature: +50 °C, the limit specified for use of the unit.
- Ingress protection: IP45 rating; the IP code classifies the enclosure's protection against the ingress of solids and water.
- Electrical protection class: Class II.
- Installation in area 1: Complies with DIN VDE 0100-701, a standard relating to electrical installations in areas containing a bath or shower; installation must follow the applicable requirements.
- Material: UV-resistant ABS plastic.
- Colour and design: White, with a smooth, compact front panel as shown in the product image.
- Installation: Suitable for wall or ceiling mounting, depending on the installation requirements.
- Impeller diameter: 230 mm, as specified by the manufacturer for this fan component.
Product classification::
SKU: 8010300113142, 11314