Towel rail radiator 600 mm wide with a height of your choice in white Aura Zehnder

• Elegant Towel Rail Radiator for heating modern bathrooms with discreet and functional connections.
• Can be used with hot water system (boiler) or mixed system.
• The mixed system combines the use of hot water and electricity to heat the towel rail.
  • It allows the towel rail to be heated without the need for the hot water heating system to be switched on.
  • An electrical resistance is added, in addition to being connected to the centralised boiler circuit.
• You can purchase the connection pack for hot water or mixed, with manual or thermostatic regulation valve of your choice.
  • Manual regulation allows a temperature set by the user.
  • Thermostatic regulation automatically adapts to changes in room temperature.
• Manufactured with cylindrical steel tubes and a subtle design thanks to the D-profile collector tubes.
• Standard colour White RAL 9016 gloss finish.
• The radiator is 600 mm wide, with a centre distance of 550 mm.
• The distance between the tubes allows towels to be hung comfortably.
• Optimal for low temperature installations.
• Its design is suitable for narrow bathrooms.
• Includes bracket for installation.
• Important to order Connection Pack if required.

Optional:

• Height measurements available:
  • 775 mm high, 300 W power (default choice).
  • 1217 mm high, 300 W power.
  • 1469 mm high, 600 W power.
  • 1856 mm high, 900 W power.

• Towel rail radiator is available:
  • Without connection pack.
  • With manual connection pack for hot water system or mixed two-pipe system (see picture of valve with reference B). This pack includes:
    • Bitube connector with valve and lockshield set.
    • Set of Bicone according to radiator size.
    • Set of 2 trim tubes to conceal the installation pipes and wall rosettes.
  • With thermostatic connection pack for hot water system or mixed two-pipe system (see picture of valve with reference B).
    • Thermostat not included.
  • With manual single-pipe connection pack left (see picture of valve with reference K).
    • When looking at the radiator from the front, the connection is on the lower left side.
  • With left single pipe thermostatic connection pack (see picture of valve with reference K).
    • When looking at the radiator from the front, the connection is on the lower left side.
    • Thermostat not included.
  • With right-hand single-pipe manual connection pack (see picture of valve reference M).
    • When looking at the radiator from the front, the connection is on the lower right side.
  • With thermostatic connection pack, single pipe right (see picture of valve with reference M).
    • Looking at the radiator from the front, the connection is on the lower right side.
    • Thermostat not included.
  • All packs are supplied in the same colour as the towel rail (white RAL 9016).

Technical data:

• Emissions for heat pump and condensing boiler approved according to EN 442.
• Recommended for installation at a minimum distance of 10 cm from the floor.
• Do not install in the shower area.