Main risks

• Instability or tipping of the bath due to incorrect levelling, missing feet, or uneven support.
• Slippage of the structure if the floor is wet, very smooth, or lacks anti-slip elements.
• Damage to the bath (cracks or warping) due to over-tightening or concentrating the load at a single point.
• Damage to the floor or to the perimeter seal if the bath shifts or vibrates during use.
• Pinching or cuts to hands when handling threads, edges, or metal parts.
• Corrosion or loosening of fasteners in humid environments that reduces load-bearing capacity.
• Interference with the waste or pipework due to an incorrectly adjusted height.

Safe use

• Ensure the feet are compatible with your bath model and use all those specified by the manufacturer.
• Before adjusting, clean the support area and verify that the floor is firm, level, and capable of bearing the load.
• Adjust the height gradually and evenly across all feet until level; avoid forcing the threads.
• Ensure each foot makes full contact with the floor; use the supplied bases or anti-slip pads.
• Tighten fixings by hand and with the appropriate tool, without striking; stop when you feel continuous resistance.
• Keep fingers away from moving areas during adjustment and wear protective gloves if necessary.
• Before using the bath, check its stability: it should not rock or move when pressing on the edges.

Storage and maintenance

• Periodically check the bath’s level and the tightness of the feet, especially after moves, building work, or impacts.
• Inspect pad wear, corrosion, and damaged threads; replace deteriorated parts.
• Keep threads free of dust, limescale, and soap; if appropriate, apply a light lubricant recommended by the manufacturer.
• Avoid water pooling under the bath; wipe up splashes that could accelerate corrosion.
• Do not lift or drag the bath to move it; loosen the feet and re-level in the new position.
• Store spare feet and accessories in a dry place, away from harsh chemicals.

Restrictions on use

• For use exclusively as support for compatible baths indoors.
• Do not use if any feet are missing, if any are deformed, or if the threads do not engage smoothly.
• Do not exceed the load specified by the manufacturer (bath, water, and users).
• Do not rest the bath on soft, uneven, or surfaces with loose coverings.
• Do not modify, cut, or drill the feet or the bath to force the installation.
• Keep children and pets away during installation, adjustment, and stability testing.
• Do not use as a step, scaffolding, or anchoring point, nor for lifting the bath.