Main risks

• Ingestion of small parts, especially magnets and button batteries, with a risk of serious injury.
• Finger trapping or pinching when handling strong magnets.
• Interference from magnets with pacemakers, defibrillators and other sensitive electronic devices.
• Device falls due to poorly installed fixings or adhesives, potentially causing damage or injury.
• Risk of electric shock when handling wiring or connected power supplies.
• Overheating, leakage or explosion of batteries due to improper use or heat exposure.
• Erratic operation or false alarms due to poor placement (vibrations, draughts, metallic surfaces, pets).
• Possible noise nuisance if sirens associated with the system are activated during testing.

Safe use

• Read the manufacturer's instructions and verify compatibility with your system before installation.
• Disconnect power before working on any wiring or power source.
• Mount the magnetic contacts, aligning the sensor and magnet as specified by the product, on clean, firm surfaces.
• Avoid installing near heat sources, direct moisture, strong vibrations or large metal masses that could affect the sensor.
• Use appropriate fixings: screws wherever possible; if using adhesive, clean the surface thoroughly and observe curing times.
• Keep magnets away from magnetic cards, electronic keys, hard drives and mechanical watches.
• Handle batteries correctly: use the recommended type and correct polarity; do not mix new and used batteries or recharge non-rechargeable batteries.
• Test operation after installation and periodically (e.g., using the test button or by opening/closing the door or window).
• If the product allows, adjust sensitivity and placement to reduce false alarms.

Storage and maintenance

• Store magnets and detectors in a dry, ventilated place, away from heat, moisture and dust.
• Keep magnets with spacers or in protective packaging to prevent impacts and demagnetisation from heat.
• Periodically check fixings, alignment and housing condition; replace deteriorated adhesives and tighten loose screws.
• Check the battery level regularly and replace it when the device indicates or if faults are detected; remove the batteries if the product will not be used for an extended period.
• Clean with a dry or slightly damp cloth; do not use abrasive products or cover the sensor's lenses or slots.
• Protect wiring from pulls and bends; avoid impacts to the magnetic contacts.
• Dispose of batteries and devices at appropriate collection points at end of life.

Restrictions of use

• Not a toy: keep magnets, batteries and small parts out of the reach of children and pets.
• People with pacemakers or other implants sensitive to magnetic fields should keep a safe distance from strong magnets.
• Do not modify, drill or open sealed units; this may cause failures and loss of performance.
• Do not use outdoors or in damp areas unless the product is specifically designed for it.
• Do not place magnets on bank cards, electronic keys, storage devices or compasses.
• Do not install on unstable or dirty surfaces, or on surfaces with flaking paint, that could compromise the fixing.
• If the installation requires connection to the mains or integration with existing wired systems and you do not have sufficient knowledge, seek professional installation.
• During tests with linked sirens, protect your hearing and inform those nearby.