Main risks

• Holder or dispenser falling due to improper fixing, overloading or use on incompatible surfaces (especially with suction-cup or adhesive models).
• Cuts or impact injuries if the dispenser, especially glass or ceramic, breaks on impact.
• Pinched fingers or scratches when inserting or removing the dispenser from the holder.
• Slips caused by soap drips on the basin, worktop or floor.
• Deterioration of the fixing due to corrosion, soap build-up or constant moisture, with a risk of detachment.
• Damage to tiles or walls when drilling or when removing adhesive pads.

Safe use

• Follow the manufacturer’s instructions and check that the dispenser’s size, shape and weight are compatible with the holder.
• Use fixings suitable for the wall type; for adhesive or suction models, clean and dry the surface, press firmly and allow the full curing time before loading.
• Position the holder on a firm surface and at a height that allows comfortable use without striking taps or corners.
• Do not exceed the maximum load; take into account the weight of the dispenser when full.
• Before first use and periodically, gently check the fixing is secure and that there is no play.
• Wipe up soap and water drips immediately to prevent slips and loss of adhesion.
• Do not lean on the holder or use it as a grab handle or coat hook.

Storage and maintenance

• Clean with a soft cloth and mild, pH-neutral products; avoid abrasives, metal scouring pads and bleaches that can damage finishes or reduce adhesion.
• Dry after cleaning and after splashes to minimise corrosion and the degradation of adhesives or suction cups.
• Check screws, wall plugs, suction cups and adhesives; retighten or replace worn parts as soon as you notice play or a loss of holding strength.
• Remove soap residue from the contact surfaces of suction cups/adhesives to maintain their effectiveness.
• Avoid continuous exposure to very hot steam or heat sources that may degrade sealants and adhesives.
• If it will not be used for a while, remove the dispenser to reduce the load on the fixing.

Usage restrictions

• Not suitable for supporting body weight, climbing or hanging towels or other heavy objects.
• Suction-cup or adhesive models may not adhere properly on rough or porous surfaces, on water-based paint, or on surfaces with pronounced grout lines.
• Do not install in areas prone to frequent knocks (behind doors or in narrow corridors) or near electrical sockets.
• Keep out of reach of young children if the dispenser is heavy or made of glass; do not allow them to play with the holder.
• Avoid prolonged contact with harsh chemicals (concentrated bleach, solvents) that can damage materials and fixings.