Main risks

• Risk of electric shock due to incorrect connections, damaged plugs or cables.
• Overheating and possible burns if the luminaire is covered or touched after prolonged use.
• Potential fire risk from proximity to curtains, textiles, carpet, dry leaves or other combustible materials.
• Trips and falls caused by cables on the floor or low-mounted luminaires in walkways.
• Glare from upward or ground-level light output, which may impair vision.
• Ingress of water or moisture into models not suitable for outdoor or damp areas, with a risk of short circuit.
• Breakage of the diffuser or housing due to impacts or being stepped on, with a risk of cuts.
• Damage to flooring caused by heat or vibrations if placed on delicate surfaces.
• Risk to children and pets from contact with hot parts, pulling the cable or tipping over the luminaire.

Safe use

• Read and follow the manufacturer's instructions before installing or using the product.
• Always disconnect the mains power before assembling, relocating or changing the light source.
• Place the spotlight or wall light on a stable, level, vibration-free surface; fix or recess only as specified for the model.
• Avoid walkways and secure cables with cable clips; do not leave them taut, pinched or hidden under rugs.
• Aim the beam to reduce glare and avoid looking directly at high-intensity LED sources at close range.
• Maintain a safe distance from curtains, papers, carpets or other combustible materials; do not cover the luminaire.
• Use the recommended bulb or light source and do not exceed the wattage specified by the manufacturer.
• For outdoor or damp areas, use only suitable models and keep all connections protected from water.
• Do not handle with wet hands or in the rain; allow to cool before moving or changing the lamp.
• If the fitting is recessed into the ground, ensure water, mud or leaves do not accumulate around the luminaire.
• In areas where bicycles or vehicles may pass, use only models designed to withstand it or reroute traffic.
• If a fixed connection to the mains is required, installation must be carried out by qualified personnel.

Storage and maintenance

• Unplug or switch off the power before cleaning or replacing the light source.
• Clean with a dry or slightly damp cloth; avoid abrasive products and high-pressure water jets.
• Check the condition of cables, plugs, seals and diffusers periodically; if you notice cracks, deformation or internal moisture, stop using the product.
• Remove dust, leaves and dirt that may block ventilation or light output, especially on outdoor models.
• Replace the light source when it fails or flickers with a compatible spare specified by the manufacturer.
• Check and gently tighten loose screws or fixings, without forcing parts.
• For storage, protect it from impacts, moisture and extreme temperatures; coil the cable without sharp kinks.
• After heavy rain outdoors, verify correct operation and that no water has accumulated around the luminaire.
• Keep the accessories and instructions for future maintenance.

Restrictions of use

• Do not use the product submerged or in shower or pool areas unless the model expressly specifies this.
• Do not place objects on top or cover with rugs, soil, decorative stones or textiles.
• Do not step on, strike, or allow vehicles to pass over the luminaire if it is not designed for it.
• Do not modify, drill or open the housing; do not splice or repair cables in a makeshift manner.
• Do not use damaged multi-socket adaptors or extension leads, nor coil live cables that may heat up.
• Do not install near intense heat sources or where it may receive direct water jets.
• Do not use timers, sensors or dimmers that are not compatible with the model.
• Do not position the product where it could cause direct glare on stairways or critical access points.
• Do not allow unattended use in the presence of small children or pets.
• If you notice a burning smell, sparks, unusual noises or persistent flickering, switch off and disconnect immediately.