Main risks

• Laptop or computer falling due to instability, overloading or poor attachment, potentially damaging the device and injuring people.
• Finger entrapment in hinges, springs or guides when adjusting or folding the stand.
• Device overheating if ventilation grilles are blocked or there is insufficient airflow.
• Trips or accidental tugs due to taut or poorly routed cables around the stand.
• Deterioration of the adhesion of pads, suction cups or adhesives over time, reducing stability.
• Damage to supporting surfaces due to slipping, vibrations or hard edges.
• Impacts or collapse of articulated arms if released suddenly or with incorrect tension.
• Postural discomfort from setting the device at an unsuitable height or angle for extended periods.
• Risk from liquids near the stand, especially on bases with fans or electrical connections.

Safe use

• Follow the recommended weight and size for the stand and place the device centrally to distribute the load.
• Always use a flat, dry and stable surface; for clamp-type stands, secure only to firm edges with no play.
• Check stability with your hands before letting go of the device; use stops or non-slip pads if available.
• Keep the laptop’s ventilation grilles clear; avoid covering the device with cases or fabrics while it is on the stand.
• Adjust height and tilt while holding the device and keeping fingers away from the joints; make slow, gradual movements.
• Route cables with sufficient slack so they do not pull on the device or interfere with the stand’s movement.
• If the stand uses adhesives or suction cups, clean and dry the contact surface and check adhesion with a light load before normal use.
• Keep drinks and liquids away; in the event of a spill, remove the device and dry the area completely before using it again.
• On stands with fans or ports, do not cover the air intakes/outlets and disconnect before cleaning.

Storage and maintenance

• Periodically check screws, clamps, joints and non-slip pads; tighten or replace parts that show play or wear.
• Clean with a soft, dry cloth; avoid abrasives, solvents and sprays near electrical components.
• Store the stand folded, with no weight on top and in a dry place, away from moisture and direct heat that could deform plastics or degrade rubber components.
• Regularly check the adhesion of suction cups or adhesives and replace any elements that have lost their grip.
• Do not apply lubricants or paints unless specifically indicated for the product.
• If you detect cracks, deformations or excessive play, stop using the stand until it is replaced.

Usage restrictions

• Do not use the stand as a step, seat, carry handle or as a support point for your body.
• Do not hang bags or other objects from the stand or use it as a coat rack.
• Do not move the assembly by lifting it by the stand with the laptop on it; remove the device before transporting.
• Do not install it on fragile surfaces (e.g., thin glass) or on unstable surfaces.
• Do not use it with equipment that exceeds the recommended size or weight, nor outdoors or in moving vehicles unless expressly specified for the product.
• Keep the stand out of reach of children and pets; prevent them from hanging from it or playing with it.
• Do not modify the stand or add parts that alter its balance or operation.
• Avoid placing it on edges or in walkways where a fall could strike people.