Main risks

• Leaks or drips due to incompatible threads, diameters or worn/damaged seals.
• Water damage to furniture, floors or adjacent rooms due to a faulty connection.
• Burns from the sudden release of hot water when testing the installation.
• Damage to tap fittings or pipework from over-tightening or using unsuitable tools.
• Minor injuries (cuts, pinches) during assembly or removal.
• Debris in the water if the adaptor is not cleaned before first use.

Safe use

• Shut off the water supply before installing, adjusting or removing the adaptor, and release pressure by opening the tap.
• Check the adaptor is compatible with your tap fittings: connection type (male/female), size and thread pitch as specified by the manufacturer.
• Check the condition of seals and sealing components; replace any that are damaged and use only sealing materials suitable for water.
• Start threading by hand to avoid cross-threading. Tighten gradually without over-tightening. If using a tool, protect surfaces to prevent marking and hold the opposing part to avoid transmitting torque to the pipework.
• Do not force alignments or use the adaptor to correct excessive misalignment; if there is strain, choose another compatible solution.
• Open the supply gradually and check for leaks with a dry cloth or paper. Test with both cold and hot water and observe for a few minutes.
• During the first few hours of use, periodically check for drips or dampness and act immediately if you detect leaks.

Storage and maintenance

• Store adaptors in a dry, clean place, in their packaging where possible, to protect threads and seals.
• Keep seals and elastic components away from sources of direct heat, strong sunlight and aggressive chemicals.
• Before installing a stored adaptor, inspect for deformation, corrosion, internal dirt or cracked seals.
• Clean with a soft cloth and soapy water. Avoid scouring pads and abrasive cleaners. Use mild descalers and keep them away from the seals.
• Periodically check for watertightness and limescale build-up; replace seals when they show wear or hardening.

Restrictions of use

• Intended for water installations. Do not use these adaptors for gas, fuels, steam or other fluids.
• Do not use the product if you notice cracks, deformation, visible corrosion or damaged threads.
• Do not exceed the pressure and temperature ranges specified by the tap manufacturer or the adaptor itself.
• Do not use the adaptor as an anchoring point or to support the weight of accessories without appropriate support.
• Keep small parts out of reach of children to prevent swallowing or misuse.
• Do not install outdoors or in corrosive environments unless the product explicitly states it is suitable.