Manufacturer Information

The manufacturer information includes the address and contact details linked to this product.

IMEX PRODUCTS

Calle número 6, parcela 11

46220 Picassent

Spain

Usage Warnings

Soap Dishes

Safety warnings and precautions

Main risks

  • Slips due to water and soap dripping onto the bathroom floor.
  • Injury or cuts if the soap dish falls or breaks.
  • Coming loose due to poor fixing (adhesive, suction cups or screws), with possible damage to the wall or tiles.
  • Build-up of moisture and soap residue that encourages mould and bad odours.
  • Deterioration of the finish or staining due to the use of unsuitable or too harsh cleaners.
  • Scratches from edges or loose, misaligned parts.

Safe use

  • Place or install the soap dish on a firm, level and dry surface, out of direct foot traffic to avoid accidental knocks.
  • If fixing with adhesive, suction cups or screws, prepare the surface properly and follow the product’s instructions and curing times before placing any weight.
  • Do not exceed the recommended load; use the soap dish only for bars of soap or compatible lightweight items.
  • Keep the drainage holes clear and empty any standing water to reduce slips and dirt.
  • Wipe up drips on surfaces and floors immediately.
  • Periodically check the security of the fixing and the condition of parts; tighten or replace if you notice any looseness or wear.
  • If you are going to drill, first check for any pipes and cables in the wall.
  • Handle and clean with dry hands to prevent it from slipping.

Storage and maintenance

  • Clean regularly using a soft cloth and neutral detergent; rinse and dry to prevent build-up and biofilm.
  • Avoid abrasive scourers, bleaches or acidic products that could damage the finish.
  • Regularly remove solidified soap residue that may obstruct drainage.
  • Keep the soap dish away from sources of direct heat that could deform adhesives or rubber components.
  • For freestanding models, place it away from the edge and on a stable, non-slip base.
  • If not used for a while, store it dry and protected from impacts and extreme humidity.
  • Replace suction cups, adhesives or worn parts when they lose adhesion or show signs of wear.

Restrictions of use

  • Do not use it as a handle, step, support or hanger for heavy objects.
  • Do not install adhesive systems on wet, rough or dusty surfaces, or on flaking paint.
  • Do not use it outdoors or in areas with pressurised water unless the product is designed for it.
  • Keep out of reach of small children if it includes detachable parts (e.g., suction cups).
  • Do not store corrosive chemicals or heavy glass objects in the soap dish.
  • Stop using it if it shows cracks, chips, deformations or damaged fixings.