Manufacturer Information

The manufacturer information includes the address and contact details linked to this product.

GROHE EspaƱa, S.A.

Avda. SarriĆ , 106, Local Grohe

08017 Barcelona

Spain

Usage Warnings

Tap Water Filters

Safety warnings and precautions

Main risks

  • Leaks or drips due to incorrect installation or deteriorated seals, with a risk of water damage and slippery surfaces.
  • Detachment of the device if it is not securely fixed to the tap, potentially causing impacts or damaging the tap.
  • Reduced flow rate, splashing or changes in the direction of the stream due to blockages or improper handling of the selector.
  • Deterioration in water quality if the cartridge is spent, expired or after long periods without use.
  • Burns if hot water passes through the filter when the model does not permit it.
  • Breakage of the housing due to overpressure or water hammer when used outside the range recommended by the manufacturer.
  • Contamination of the filtered water when handling the cartridge with dirty hands or placing parts on contaminated surfaces.

Safe use

  • Check tap compatibility and use only the adapters and seals supplied or recommended by the manufacturer.
  • Assemble the unit without forcing and tighten by hand; avoid tools that could crack the housing or damage the thread.
  • Turn the water on slowly after installation and check that there are no leaks; periodically inspect connections and seals.
  • Do not run hot water through the filter unless the product allows it; use bypass mode if available.
  • After installing or changing the cartridge, let the water run until it runs clear to remove air and loose particles.
  • If the tap has not been used, flush for a few seconds before drinking or cooking.
  • Wash your hands before handling cartridges and avoid touching the filter media directly.
  • Do not block the water outlet or use the device if the housing is cracked or deformed.

Storage and maintenance

  • Replace the cartridge according to the manufacturer's time or capacity guidelines, or sooner if you notice reduced flow, abnormal taste or odour.
  • Clean the exterior and the aerator with a soft cloth and non-abrasive products; rinse thoroughly so that no chemical residues remain.
  • Regularly inspect seals and connections; replace any that show wear, stiffness or cracks.
  • Protect the unit from frost, excessive heat and direct sunlight; do not expose it to impacts.
  • After prolonged periods without use, perform a thorough flush and, if indicated by the manufacturer, replace the cartridge.
  • Store spare cartridges sealed, in a cool, dry place; do not use expired or frozen cartridges.

Restrictions of use

  • Domestic indoor use with cold mains potable water.
  • Not suitable for microbiologically unsafe water or of unknown origin without appropriate prior treatment.
  • Do not use outside the temperature and pressure ranges specified by the manufacturer.
  • Do not modify the device or use spare parts not recommended for the model.
  • Not suitable for applications requiring high-purity water (e.g., medical equipment, laboratories or certain aquariums).
  • Do not allow children to install or handle the system; keep small parts and cartridges out of their reach.
  • Do not use the filter if it is not firmly secured or if leaks, unusual odours or discolouration of the water persist.