Main risks

• Blows and impacts to knees, elbows, shins and forearms during lifting, handling or work on hard surfaces.
• Cuts, punctures or abrasions when handling parts with sharp edges, splinters or rough surfaces.
• Entrapment or snagging in machinery due to straps, buckles or protruding edges of the protector.
• Trips or loss of balance if the protector shifts, comes loose, or adds bulk in walkways.
• Skin irritation, excessive sweating or allergic reactions to materials or finishes.
• Excessive compression that limits circulation, with possible numbness or tingling.
• Insufficient protection if an unsuitable model is chosen for the risk or activity.

Safe use

• Select the appropriate type and size of protector for the risk and task; check compatibility with footwear, gloves or other protective equipment.
• Inspect before each use: cracks, broken seams, compressed padding, cracked rigid parts, hook-and-loop fasteners or buckles that do not close properly.
• Fit the protector according to the manufacturer’s instructions; tighten it firmly without over-compressing and ensure it does not restrict mobility or the sensitivity needed to work.
• Tuck away and secure loose straps or ends to prevent snagging; keep clear of moving machine parts.
• Readjust or remove the protector if it shifts, causes pain, tingling, coldness in the area or loss of sensation.
• Replace the product if it has suffered a heavy impact, a deep cut, or shows significant wear.
• Keep away from heat sources, flames, sparks, chemicals or electricity when the model is not designed for those risks.

Storage and maintenance

• Clean after use to remove dust, oils and particles; use water and mild soap unless otherwise indicated by the manufacturer.
• Air-dry in the shade; avoid direct heat, prolonged sunlight or forced drying that may deform materials.
• Store in a dry, ventilated place with no weight on top to avoid deforming padding or rigid parts.
• Periodically check the condition of straps, hook-and-loop fasteners and buckles; replace worn components only if permitted by the manufacturer.
• Avoid solvents, bleach or abrasive products that may damage fabrics, foams or plastics.
• Keep away from sources of ozone, hydrocarbons and persistent moisture that accelerate degradation.

Restrictions on use

• Do not use the protector if it is damaged, heavily worn or beyond its service life as stated by the manufacturer.
• Do not use it against risks for which it is not designed; unless expressly stated, it does not protect against harsh chemicals, high temperatures, electric arc or high-energy cutting tools.
• Do not modify the product or add non-approved accessories (drilling, cutting, heating, gluing parts).
• Do not share protectors in direct contact with the skin without adequate hygiene between users.
• Do not use the protector as a seat, load support or tie-down.
• Avoid use on children; for inexperienced users, fit it under supervision and check the fit.
• In areas with moving machinery, avoid protectors with loose or protruding elements that may snag.