Main risks

• Severe cuts and amputations from contact with the moving chain.
• Kickback when the tip of the guide bar contacts the workpiece or when cutting wood under tension.
• Ejection of chips and debris that can injure the eyes and face.
• Prolonged noise and vibration that can cause hearing damage and discomfort in hands and arms.
• Poisoning by exhaust gases and oxygen depletion in petrol models if used in enclosed spaces.
• Burns from hot surfaces on engine-driven machines.
• Electrical hazard in corded models or in very damp environments.
• Fire due to fuel spills or sparks near flammable materials.
• Loss of control due to fatigue, poor posture, unstable ground or unsuitable clothing.
• Falling branches or sudden movement of the workpiece while cutting.

Safe use

• Read and follow the manufacturer’s instructions before first use.
• Always use appropriate PPE: goggles or a face shield, hearing protection, cut-resistant gloves, helmet, chainsaw protective trousers and safety boots with toe cap and slip-resistant sole.
• Before starting work, check that the chain is in good condition, correctly tensioned and lubricated; do not use the tool if you detect damage or loose parts.
• Keep the work area clear and keep third parties and pets at a safe distance.
• Hold the chainsaw with both hands, adopt a stable stance and avoid cutting above shoulder height.
• Avoid contact with the tip of the guide bar and plan the cut to prevent pinching or kickback.
• Secure the workpiece and check that it does not contain nails, stones or other hard objects.
• Switch off and disconnect the power source (battery, cable or engine) before adjusting, cleaning, clearing jams, transporting or changing the chain.
• For corded models, keep the cable behind you and out of the cutting line; avoid working with damaged cables.
• Work outdoors or in well-ventilated areas; do not use petrol models indoors.
• Avoid working in heavy rain, icy conditions, high winds or poor visibility.

Storage and maintenance

• Allow the machine to cool, remove sawdust residues and fit the guide bar cover (scabbard) before storing or transporting.
• Store the chainsaw out of the reach of children, locked away and in a stable position.
• Keep the chain sharp and correctly tensioned; replace the chain, guide bar or safety components when worn.
• Use compatible chain oil and check the lubrication system regularly.
• For petrol models, store fuel in suitable containers, tightly closed and away from heat sources; clean up spills immediately.
• For battery models, store and transport batteries protected from impacts and short circuits, in a cool, dry place, out of direct sunlight.
• Do not use or charge the tool if you detect cracks, looseness, exposed wires, unusual smells or overheating; for complex repairs contact a qualified service centre.

Usage restrictions

• Not suitable for minors; keep away from children and untrained persons.
• Do not use under the influence of alcohol, drugs, medication that causes drowsiness or when extremely fatigued.
• Do not tamper with or disable safety devices or make modifications.
• Do not use petrol models indoors or near naked flames, sparks or flammable materials.
• Do not work on ladders, in trees or at height without specific equipment and training.
• Do not cut materials other than natural wood unless expressly indicated by the manufacturer.
• Do not transport the chainsaw with the chain moving; engage the chain brake when moving short distances.
• Do not operate near power lines or in areas with concealed services without first verifying a safe distance.
• Always hold the tool with both hands; do not use it one-handed.