Main risks

• Cuts or impacts from bit slippage or unexpected screw rotation.
• Sudden wrist twist from reaction torque.
• Flying splinters, shavings or screws, with possible eye injury.
• Entanglement of loose clothing, jewellery or hair in the rotating shaft or bit.
• Electrical hazard from damaged cables, faulty plugs or use in damp environments.
• Overheating of the motor, bits or batteries, with risk of burns or fire.
• Damage to the workpiece or screw head due to excessive torque or an unsuitable bit.
• Loss of balance and falls when working at height or on ladders.
• Accidental penetration of hidden cables or pipes when driving screws into walls or ceilings.

Safe use

• Check the tool before use: housing free of cracks, cable or battery in good condition, and bit securely attached.
• Use compatible bits in good condition; start at low speed and increase only if necessary.
• Hold the screwdriver firmly and maintain a stable stance; secure the workpiece with clamps where appropriate.
• Align the bit with the screw and apply straight pressure to prevent slippage.
• Keep hands away from the rotating area; tie back hair and avoid loose clothing or accessories.
• Wear safety glasses; use a dust mask when particles are generated and hearing protection if noise levels require it.
• Disconnect from the mains or remove the battery before changing bits, adjusting accessories or cleaning.
• Work in dry, well-lit, uncluttered areas; keep flammable materials away.
• Before driving screws into walls or ceilings, check for any hidden cables or pipes.

Storage and maintenance

• Allow the tool and bits to cool before storing; wipe off dust with a dry cloth.
• Inspect and replace worn or damaged bits to prevent slippage and stripped screws.
• Keep ventilation slots free of dirt and avoid using harsh solvents or water for cleaning.
• Store the tool in a dry place, protected from dust, moisture and direct sunlight, preferably in its case.
• Cordless models: use only the compatible charger, charge on a non-flammable surface and do not cover the charger; do not charge or use batteries that are swollen, damaged or hot.
• For prolonged storage, remove the battery and avoid the terminals coming into contact with metal objects.
• Corded models: wind the cable without strain or tight bends, and check the insulation regularly.

Restrictions on use

• Keep out of reach of children; use restricted to adults familiar with power tools.
• Do not use in the rain, with wet hands or in atmospheres with flammable gases, vapours or dust.
• Do not use the tool as a drill, chisel or lever, and do not force it beyond its capacity.
• Do not use incompatible accessories or modify the tool, charger or battery.
• Do not operate if there is visible damage, a burning smell, unusual sparks, abnormal vibrations or excessive heat.
• Avoid working at height without stable support; do not use the tool if you are tired or under the influence of alcohol or medication that reduces alertness.