Main risks

• Cuts or pinching injuries when handling grates, metal edges and fixings.
• Blockages from hair, soap scum and limescale that can cause standing water and slips.
• Bad odours due to drying out of the trap seal or build-up of residues.
• Leaks if joints and seals are not correctly executed.
• Damage to the waterproofing of the tray or floor when installing or removing the drain.
• Tripping or damage to the floor if the grate is not left flush or becomes deformed.
• Exposure to wastewater and splashes during cleaning.
• Skin or eye irritation from improper use of concentrated cleaners.

Safe use

• Review the contents and the manufacturer's instructions before starting.
• Check dimensions, available height and compatibility with the type of tray or floor before fixing anything.
• Wear gloves and, if using chemicals or cutting sealants, eye protection.
• Do not step into the drain opening or place loads on it without the grate in place.
• Apply sealants and fit seals as directed, and allow the specified curing times before using the shower.
• Ensure the grate sits firm and flush, with no sharp edges or loose parts.
• Avoid introducing fats, construction debris, wipes, excessive hair, or products that solidify.
• During cleaning, remove the grate with the appropriate tool, take out baskets or filters if present, and refit them correctly.
• Do not mix cleaning products (for example, bleach with acids or ammonia), and ventilate the bathroom.
• In infrequently used showers, pour some water in periodically to maintain the odour trap, if the model incorporates one.
• After installation or maintenance, perform a water test and monitor for any leaks.

Storage and maintenance

• Store the drain and its accessories in a dry, clean place protected from impacts before installation.
• Keep screws, seals and small parts in bags or boxes to prevent loss.
• Avoid saline or chemical environments that could damage metals or plastics.
• During building works, cover the drain opening to prevent debris entering.
• Clean the grate, baskets or filters, and the interior periodically with warm water and a neutral detergent; rinse and dry.
• Avoid abrasive scouring pads and highly acidic products or high concentrations of chlorine that may scratch or corrode.
• Periodically check the condition of the seals and the trap; replace components if you observe cracks, looseness or persistent bad odour.
• Visually check for damp or staining around the shower that may indicate a leak.

Restrictions of use

• Intended to drain shower water; do not use for solvents, paints, oils, cement or other construction debris.
• Do not drill, cut or modify the drain body or the grate.
• Do not use if the grate or the frame is deformed, cracked or has loose fixings.
• Do not leave the drain opening uncovered or the grate removed without supervision.
• Keep children and pets away during installation or cleaning.
• Avoid point loads or heavy impacts on the grate that could deform it.
• In installations integrated with waterproofing systems or continuous floor finishes, the involvement of a qualified installer may be advisable.