Main risks

• Leaks from loose connections or damaged hoses that can cause flooding and damage to nearby furniture or equipment.
• Overpressure or water hammer that may damage housings, pipework and fittings.
• Contamination of the treated water due to spent filters, a degraded membrane or unhygienic handling.
• Bacterial growth due to stagnation when the system remains unused for prolonged periods.
• Damage to the equipment if connected to the hot water line or exposed to extreme temperatures or freezing.
• Spills if the reject line is not securely fastened to the drain or lacks protection against backflow.
• Risk of drips near sockets or appliances if the installation is not monitored.

Safe use

• Connect only to the cold, potable mains water supply. Do not use with water of dubious origin without appropriate pre-treatment.
• Shut off the stop valve and depressurise before installing, replacing filters or handling connections.
• Use tubing and fittings compatible with potable water, in good condition and fully inserted; avoid overtightening.
• Secure the reject line to a suitable drain protected against backflow or odours.
• After installation or filter replacement, flush and discard the first litres according to the manufacturer's instructions.
• Place the system in an accessible, stable location with space for inspection and cartridge changes.
• Check for possible leaks during the first hours and days of use and after any work carried out.
• Avoid direct sunlight and heat sources; do not connect to hot water.

Storage and maintenance

• Replace pre-filters, post-filters and the membrane within the recommended timeframes and flow rates; do not exceed service life.
• Carry out periodic cleaning and disinfection of the unit and the tank, especially after periods of inactivity.
• Protect the system from freezing and high temperatures; do not install outdoors without adequate shelter.
• Periodically inspect hoses, housings, seals and valves; replace worn or cracked parts.
• Keep the area dry and ventilated; remove any drips immediately and trace their source.
• Store spare parts in their sealed packaging, in a clean, dry place; handle cartridges with clean hands.

Restrictions of use

• Do not use with hot water or outside the pressure and temperature ranges specified by the manufacturer.
• Do not use to treat microbiologically unsafe water or water of unknown origin without appropriate pre-treatment.
• Do not modify the equipment or disable valves, restrictors or safety devices.
• Do not use if persistent odours, tastes or turbidity are detected after the initial flush; stop use and inspect.
• Not intended for critical applications (e.g., medical uses or industrial processes) without specific water quality controls.
• Keep out of the reach of children and prevent them from handling valves, the tap or connections.
• If you do not have basic plumbing knowledge, installation and maintenance must be carried out by qualified personnel.