Main risks

• Cuts or injuries due to glass breakage or sharp, chipped edges.
• Finger pinches and entrapment in hinges, profiles and tracks.
• Impacts or panel falling if fixings are loose or incorrectly installed.
• Slips due to leaks and puddles on the bathroom floor.
• Damage from impacts by hard objects or knocks against the taps and fittings.
• Possible glass breakage due to sudden temperature changes applied directly to its surface.
• Injury from using the bath screen as a support, handrail or to hang items.
• Risks when handling the product due to its weight and bulk.

Safe use

• Install and adjust the bath screen following the manufacturer's instructions; before first use, check that the assembly is secure and aligned.
• Open and close slowly; keep fingers away from hinges, profiles and tracks.
• Do not force movement if it jams; clean the tracks or check the alignment before continuing use.
• Avoid striking edges and corners; do not rest the shower head or the taps against the glass.
• Avoid pouring very hot water onto cold glass (and vice versa) to reduce the risk of breakage.
• Do not lean on the bath screen or hang towels or other items from it.
• Check watertightness: fit the bottom seal correctly and close fully before showering.
• Keep the floor outside the bath dry and clear; use a non-slip mat outside the bath.
• If sealant or silicone has been applied, allow the stated curing time before wetting the area.
• To move or reposition the panel, do so with two people and hold it by the edges.

Storage and maintenance

• Before installation, store the panels vertically, in their packaging, on a stable surface and protected from impacts.
• Avoid areas with constant humidity and no ventilation, frost, or direct, intense heat.
• Clean with warm water and neutral pH soap; rinse and dry with a soft cloth to minimise limescale.
• Do not use scouring pads, blades or abrasive products, solvents or concentrated bleach.
• Keep tracks and profiles free of dirt and soap residue to ensure smooth operation.
• Periodically check fixings, seals and sealant; replace worn or cracked parts.
• Tighten loose fixings without overtightening; if specified by the manufacturer, lightly lubricate rollers or tracks with the recommended product.
• Renew the silicone sealant when it shows cracks, persistent mould or detachment.

Restrictions of use

• It is not a support element: do not stand, sit, push against it or use it as a handrail to get in or out of the bath.
• Do not hang towels, baskets or heavy objects unless the product is expressly designed for it.
• Do not allow use by young children without supervision; keep children away while opening or closing.
• People with reduced mobility should use specific aids; do not use the bath screen as a support.
• Do not modify, drill or remove stops, latches or safety components of the system.
• Do not use pressurised steam cleaners on the glass, seals or profiles unless expressly indicated by the manufacturer.