Manufacturer Information

The manufacturer information includes the address and contact details linked to this product.

Emuca S.A.

Polígono Industrial El Oliveral c/H, 4

46394 Riba-Roja del Túria (Valencia)

Spain

Usage Warnings

Wardrobe Racks and Rails

Safety warnings and precautions

Main risks

  • Rail or hook falling due to poor fixing or overloading, with possible knocks and damage to the furniture.
  • Bending or breakage of the rail when the load is exceeded, causing garments to fall.
  • Pinching or cuts from edges, screws or metal parts during assembly or adjustment.
  • Adhesive hooks coming loose if the surface is unsuitable or the curing time is not observed.
  • Interference with hinged or sliding doors that may cause snagging or trapping.
  • Risk of falling when standing on unstable chairs to install at height.
  • Small parts during assembly that may pose a risk of ingestion to children or pets.
  • Corrosion in humid environments that weakens the fixing and stains clothing.

Safe use

  • Check compatibility with your wardrobe (material, thickness and distance between sides) before installing.
  • Observe the stated maximum load and distribute the weight evenly, avoiding concentrating heavy items in the centre.
  • Use fixings suitable for the furniture material and avoid reusing damaged holes.
  • Level and check for firmness by pulling gently before hanging garments.
  • If the model is extendable or pull-down, fully lock the mechanism and do not over-extend it.
  • For over-door hooks, ensure the hook sits securely and that the door opens and closes without rubbing.
  • For adhesive models, clean and degrease the surface and allow the full curing time before loading.
  • During installation, use a stable ladder and eye protection when drilling; keep fingers away from hinges or springs.
  • Do not hang from or use the rail for support; avoid hanging very wet garments if this could exceed the load.
  • Check that there are no protruding screws or edges that could snag or tear garments.

Storage and maintenance

  • Clean with a soft cloth, dry or slightly damp; avoid abrasive products that could damage the finish.
  • Dry the surface if it gets wet to prevent rust and stains on textiles.
  • Periodically check screws, brackets and joints; re-tighten if you notice any play.
  • Replace bent, cracked or rusted parts; do not try to straighten deformed rails.
  • Lightly lubricate pull-down or telescopic mechanisms if they feel stiff.
  • Keep fittings and spare parts out of the reach of children and pets.
  • Avoid prolonged exposure to moisture or condensation; ventilate the inside of the wardrobe if you detect damp.

Usage restrictions

  • Not designed to support the weight of people, or for climbing or swinging.
  • Do not use outdoors or in high-humidity areas unless specifically designed for this.
  • Do not install on damaged, cracked or too thin panels that do not provide a reliable fixing.
  • Do not drill or modify the furniture outside the positions intended by the system manufacturer.
  • Do not combine incompatible brackets, screws or adhesives, or those of dubious origin.
  • Keep children and pets away during assembly and the initial load tests.
  • Avoid hanging sharp objects, excessively wet items or electrical devices.
  • Do not obstruct sliding door tracks or hinges; keep the opening and closing area clear.