Main risks

• Electric shock when handling live wiring.
• Overheating due to lack of ventilation, use of unsuitable lamps or wattage, or covering the downlight; potential fire hazard.
• Burns from contact with parts that may become hot during use.
• Ingress of dust or moisture that can cause failures, corrosion or short circuits.
• Cuts or pinching from edges of the bezel or retaining springs.
• Downlight falling if the fixings are not properly secured, with risk of personal injury and property damage.
• Glare and eye strain from looking directly at the light source.
• Damage to the ceiling or to concealed services (cables or pipes) when cutting the hole.
• Flicker, buzzing or premature failure due to incompatible dimmers or power supplies.
• Risk of falling when working at height if the ladder or surface is not stable.

Safe use

• Isolate the power at the consumer unit before installing, replacing or handling the downlight.
• Allow the downlight to cool before touching it or removing the lamp.
• Verify the cut-out dimensions and available depth; ensure the ceiling is suitable for recessed installation and allow space for ventilation.
• Use compatible light sources, transformers and dimmers, respecting the type and maximum wattage specified by the product manufacturer.
• In damp or splash zones, use models with adequate protection against moisture and ensure seals and closures are properly seated.
• Secure the clips and bezel correctly; check with a gentle pull that the assembly is firm before closing the ceiling or continuing the work.
• Avoid covering the downlight or its gear with thermal insulation or other materials unless the product is specifically rated for it.
• Before drilling, locate any concealed cables or pipes; use eye protection and a dust mask where appropriate.
• Do not look directly at illuminated LEDs at close range.

Storage and maintenance

• Store the downlights in a dry, ventilated place, protected from moisture, dust and heat sources.
• Avoid placing weight on bezels, diffusers and springs to prevent deformation.
• Clean with a soft, dry cloth; switch off the power before cleaning and avoid abrasive products or liquids that could penetrate the unit.
• Periodically check the tightness of fixings and the condition of cables and diffusers; replace the product if you notice cracks, discolouration, a burning smell, crackling noises or persistent flicker.
• Keep ventilation slots or holes free of dust and avoid painting or sealing the bezel in a way that impedes heat dissipation.
• Replace lamps and components only with compatible spares and in accordance with the product instructions.

Restrictions on use

• Do not install in very narrow or enclosed ceilings without the minimum ventilation clearance recommended by the manufacturer.
• Do not install in showers, baths or direct splash zones unless the model is specifically designed for it.
• Do not use with incompatible dimmers or power supplies.
• Do not cover with insulating materials, fabrics or decorative elements unless expressly permitted by the product.
• Do not modify the downlight, drill its body or replace components with non-specified parts.
• Do not use if the wiring is damaged, parts are missing or the fixings are deformed.
• Not suitable for environments with flammable vapours, combustible dust or intense vibration unless expressly indicated by the manufacturer.
• Children must not handle or install luminaires; keep them out of reach during installation and maintenance.
• Do not use outdoors without specific weatherproof protection.