Manufacturer Information
The manufacturer information includes the address and contact details linked to this product.
EUZIEL International GmbH
Lüscherhofstr. 70
45356 Essen
Spain
Usage Warnings
Mirror Cabinets
Safety warnings and precautions
Key risks
- Unit falling due to inadequate fixings or an unsuitable wall, posing a risk of injury and damage.
- Breakage of the mirror or glass shelves, which may cause cuts.
- Finger trapping in hinges or sliding doors.
- Electrical hazard in models with lighting or sockets, especially in damp environments or if handled while the mains power is connected.
- Overloading of shelves or doors may cause deformation, detachment, or the unit to tip over.
- Impacts when opening doors in confined spaces or against taps, sockets and walls.
- Falls from climbing on or leaning on the unit to reach high shelves.
- Deterioration due to condensation and the use of harsh cleaning products that damage the mirror, edges and fittings.
Safe use
- Install in accordance with the manufacturer's instructions, verifying the wall type and using fixings suitable for the material (brick, concrete, plasterboard, etc.).
- Check for level and ensure safe clearances from taps, sockets and doors to avoid impacts when opening.
- If the model includes electrical components, isolate the power before any connection and keep them away from water jets; avoid handling with wet hands.
- Do not overload: respect the stated load capacity, distribute weight, and place heavier items on lower shelves.
- Open and close the doors gently, keeping fingers clear of hinges and runners; do not hang from or apply weight to the doors.
- To reach high shelves, use a stable step stool; do not climb on or lean on the unit.
- Use only compatible lamps and consumables of the recommended wattage; do not cover any ventilation slots of the lighting system.
- Wipe away splashes and condensation after showering and ventilate the bathroom to reduce moisture on the mirror and fittings.
- Periodically check that fixings, hinges and shelf supports are secure.
Storage and maintenance
- Before installation, keep the product in its packaging, in a dry place and protected from impacts; avoid resting it on edges and do not place weight on top.
- Clean the mirror and unit with a soft cloth and neutral cleaners; avoid abrasives, scouring pads, ammonia, bleach or solvents.
- Apply cleaners to the cloth, not directly to the mirror edges, hinges or electrical components.
- Dry after cleaning to protect edges, fittings and metal areas against corrosion.
- Retighten screws and adjust hinges if they become misaligned; replace shelf supports if they show play or wear.
- Replace damaged parts immediately (cracked mirror, chipped shelves, faulty lights) and do not use the unit until repaired.
- On models with electrical components, isolate the power before maintenance or when changing lamps/consumables.
Usage restrictions
- Intended for indoor, domestic use; not suitable for outdoor use or for areas with direct and continuous exposure to water jets (inside showers or baths).
- Do not modify the product or drill the unit or mirror to add accessories not intended.
- Do not use as a step, seat or anchoring point for hanging or leaning.
- Do not hang towels or other weights on the doors or handles.
- Keep potentially hazardous products (medicines, blades, chemicals) out of the reach of children; close the unit after use.
- Installation and any electrical connection must be carried out by qualified personnel.
- Do not use the unit if it is loose, unstable, or if the mirror shows visible damage.