Main risks

• Knocks, cuts and crush injuries when handling heavy parts or parts with sharp metal edges.
• Entrapment and ejected parts due to springs, tensioners, fans or other components under tension.
• Burns from hot surfaces on the engine, brakes or exhaust.
• Electric shocks, sparks or short circuits when working with the battery or wiring.
• Leaks of flammable or corrosive liquids and exposure to harmful vapours.
• Loss of vehicle control due to incompatibility or incorrect installation of key components.
• The vehicle may fall if it is inadequately supported during parts replacement.
• Eye or respiratory irritation from dust, rust or friction particles.

Safe use

• Check the replacement part is compatible with the make, model, engine and year; cross-check manufacturer references.
• Read and follow the replacement part instructions and the vehicle manual before starting.
• Work with the engine off and cool; disconnect the battery when working on electrical systems.
• Raise and secure the vehicle on a level surface using stable stands and chocks; do not rely solely on the lifting jack.
• Wear gloves, goggles and workwear; avoid rings or loose clothing.
• Keep the area ventilated and free of flames or sparks when handling fuel filters, tanks or lines.
• Observe the assembly order and the recommended torque settings; use threadlockers, gaskets or sealants only when specified.
• After installation, check for play, leaks and dashboard warning lights; carry out a low-speed test in a safe area.
• Dispose of waste and used fluids properly; do not pour them down the drain.

Storage and maintenance

• Keep spare parts in their packaging, in a clean, dry place, away from moisture and heat.
• Protect electrical and electronic components from impacts and moisture.
• Do not bend, crush or contaminate with grease any friction materials, belts, hoses or seals.
• Keep sealing surfaces clean; store gaskets, seals and filters protected from dust.
• Check manufacturing or expiry dates where applicable (e.g., fluids or batteries).
• Keep small parts and fasteners organised to avoid loss or mix-ups.
• Store out of reach of children and pets.

Restrictions on use

• Do not install parts that are damaged, deformed, corroded or whose packaging has been tampered with.
• Do not force, sand or drill a replacement part to make it fit; if it does not fit, it may be incompatible.
• Do not reuse bolts and screws, self-locking nuts, pins, gaskets or single-use clips when replacement is specified.
• Avoid mixing components with different specifications within the same system if it may affect performance.
• Do not work under the vehicle without proper supports, nor on unstable or sloping surfaces.
• Do not drive at normal speed immediately after a repair; check correct operation and increase speed progressively.
• Installation of safety-critical components (brakes, steering, suspension or airbags) should be carried out by qualified personnel.