Key risks

• Cuts when handling utility knives, scissors or bladed dispensers.
• Skin irritation or allergic reactions from contact with the adhesive; discomfort when removing tape adhered to body hair.
• Damage or lifting of paint, varnish and delicate finishes when peeling off the tape; possible sticky residue.
• Adhesion failure if applied to dirty, damp or dusty surfaces, with a risk of items falling or packages opening.
• Electrical hazard if unsuitable tape is used on cables or joints.
• Fire hazard when exposing the tape to heat sources, sparks or flames.
• Slips caused by tape remnants or liners on the floor.
• Choking or strangulation if children or pets play with rolls, strips or plastic wrapping.
• Inhalation of vapours or unpleasant odours from some adhesives in poorly ventilated spaces.
• Finger pinches or entrapment in dispensers with rollers and blades.

Safe use

• Choose the right tape for the task (packaging, masking, double-sided, marking, electrical insulation, etc.).
• Apply to clean, dry, dust- and grease-free surfaces; test in an inconspicuous area to check adhesion and removal.
• Do not overstretch the tape during application; press evenly to ensure full contact.
• For cables, only use tapes designed for electrical insulation and always work with the power switched off.
• Do not use the tape as a load-bearing element, anchor, harness or for structural repair.
• Avoid prolonged skin contact; if it adheres accidentally, remove it gently.
• Always cut away from your hands and body; store blades and dispensers with the blade covered.
• Ventilate the area if you notice a strong odour and keep the tape away from flames or sparks during application.
• Do not cover ventilation slots, safety labels or surfaces that must dissipate heat.
• On floors or for signage, secure the edges and check periodically to prevent lifting and tripping.
• Remove liners and offcuts immediately and dispose of them to prevent slips or accidental ingestion.
• If the application is temporary, remove the tape within a reasonable timeframe to reduce residue and minimise the risk of pulling off the finish.

Storage and maintenance

• Store tapes in a cool, dry place, away from direct sunlight, heat sources and moisture.
• Keep rolls in their packaging or a sealed bag to prevent dust and dirt on the adhesive edges.
• Avoid crushing or deforming the rolls; do not place excessive weight on top.
• Protect tapes from prolonged UV exposure, which can degrade the adhesive.
• Check their condition periodically: if the adhesive is dried out, cracked or shows clear loss of adhesion, do not use it for critical applications.
• Clean dispensers, scissors and blades regularly, removing adhesive residue with a suitable non-abrasive cleaner.
• Organise the rolls so the oldest are used first.
• Keep out of reach of children and pets.
• Dispose of offcuts and liners in an appropriate container; avoid leaving them loose in the work area.

Restrictions on use

• Not suitable for lifting loads, restraining people or as protective equipment.
• Do not use as a permanent seal on pressurised pipes or in gas or water systems.
• Do not apply on components that reach high temperatures, near flames or in areas with a risk of sparks.
• Do not use in direct contact with food, broken skin or sensitive areas.
• Do not use as the sole fastening method where failure could cause personal injury or the fall of heavy objects.
• Do not apply on wet, dusty, greasy or freshly painted surfaces without prior testing.
• Do not use on live cables or to make makeshift joints in electrical installations.
• Not intended for continuous immersion underwater or for prolonged outdoor exposure unless the product specifies this.
• Do not allow use by children without adult supervision; keep away from babies due to the risk of suffocation or strangulation.
• Do not use in safety systems (for example, airbags, brakes or other critical components).