Main risks

• Tipping or shifting of the unit due to washing machine vibrations, especially during the spin cycle.
• Falling objects or shelf breakage due to overloading or poor weight distribution.
• Finger trapping when closing doors or drawers, or impact injuries from sudden closures.
• Deterioration from humidity, condensation or leaks that can weaken the structure and cause instability.
• Overheating or malfunction of the appliance due to obstructed ventilation or blocked access to the mains plug, tap and drain.
• Detachment of the assembly due to wall fixings that are insufficient or unsuitable for the wall type.
• Slips caused by detergent or water spills on surfaces near the unit.
• Damage to cables or hoses if pinched or forced where they pass through the unit.
• Minor cuts from sharp edges or exposed screws/fasteners if not properly protected.

Safe use

• Check dimensional compatibility and always observe the maximum load specified for shelves and worktops.
• Install the unit on a level surface and secure it to the wall using all designated fixing points and fittings appropriate to the wall type.
• Leave sufficient clearance around the appliance for ventilation and quick access to the mains plug, tap and drain; do not block access panels or service covers.
• Distribute weight: place heavier items (detergents, large containers) on lower, central shelves.
• Keep cables and hoses free of kinks and pinching as they pass through or around the unit; avoid tight bend radii.
• Do not place or stack appliances on surfaces not designed for this; use only dedicated stacking solutions where applicable.
• Wipe up spills of water, bleach or fabric softener immediately and use trays or drip trays for containers that may leak.
• During washing, keep doors and drawers closed and ensure they do not strike the washing machine due to vibration.
• Do not obstruct vents or openings in the unit intended for ventilation.

Storage and maintenance

• Position the unit in a dry, well-ventilated area; wipe away condensation or splashes to prevent swelling and mould.
• Clean with a soft cloth and mild soap; avoid abrasives, metal scouring pads and solvents that could damage surfaces.
• Periodically check screws, hinges and wall fixings; retighten if you detect looseness and replace any damaged parts.
• Regularly check that shelves show no bowing or cracks and reduce the load if necessary.
• Keep access to the mains plug, shut-off tap and drain clear so you can act quickly in the event of an incident.
• Encourage airflow by leaving the doors ajar after use if humidity or a stale odour builds up.
• Protect the floor with stoppers or anti-slip bases, if specified by the furniture manufacturer, to reduce vibration and slipping.

Restrictions of use

• Do not use as a ladder, seat, work platform or support to climb on.
• Do not exceed the maximum load per shelf or worktop, nor store heavy objects at height.
• Do not install outdoors or in areas with direct exposure to water or continuous steam.
• Do not modify the structure of the unit (cut reinforcements, drill outside designated areas) or remove stabilising elements.
• Do not cover the rear of the appliance with solid panels or block air outlets.
• Do not store flammable or pressurised products near heat sources (e.g., tumble dryers) or in unventilated compartments.
• Do not allow children to play with the unit or hang from doors or shelves; keep detergents and cleaning products out of their reach.