Key risks

• Slips caused by rain, ice, algae or moss, sand or accumulated dust.
• Trips due to uneven areas, loose pieces or raised joints.
• Cuts or splinters when handling slabs, boards or profiles.
• Burns from surfaces that heat up in the sun.
• Damage from overloading, impacts or dragging that may crack or loosen components.
• Deterioration due to standing water and frost which can cause movement or breakage.
• Permanent stains from oils, grease or chemicals.
• Risk of falling at terrace edges, steps or around swimming pools when the surface is wet.

Safe use

• Check that the base is firm, level and well-drained; follow the product-specific instructions.
• Wear gloves when handling pieces and lift with assistance to avoid injury.
• Place and fix the pieces securely, without play or protruding edges; inspect periodically and readjust if necessary.
• Keep the surface free of standing water, leaves, sand and grease; clean up spills immediately.
• Take extra care when wet or icy; wear footwear with non-slip soles.
• Avoid dragging furniture, planters or barbecues; use protectors on feet and soft wheels.
• Around heat sources, use insulating bases and observe safety distances appropriate to the material.
• In winter, remove snow and ice with suitable tools; avoid de-icers that are not compatible with the material.
• For cleaning, prefer water and a neutral detergent; avoid acids, concentrated bleaches, solvents, or bringing a pressure washer too close to joints and edges.

Storage and maintenance

• Store uninstalled material in a dry, ventilated place and protected from the weather; keep packages closed until use.
• Stack on a flat, stable surface; do not overload or leave overhangs.
• Raise wood or composite products off the ground and cover them without fully sealing to prevent condensation.
• Handle and transport, avoiding impacts to edges and corners.
• Sweep and wash regularly; remove mould, moss and algae with products suitable for the material.
• Check and replace joints, sealants, anchors or clips when they show wear or become loose.
• On exterior wood surfaces, apply oil or woodstain when necessary, following the product instructions.
• Keep drains, gutters and expansion joints free of obstructions to promote drainage.

Restrictions of use

• Do not install on unstable or soft bases, with seepage or without a minimum fall for drainage.
• Do not use in continuous immersion or inside pool basins except for products expressly indicated.
• Do not overload with vehicles, machinery or high point loads if the system is not designed for it.
• Do not use open flames, embers or heated tools on the surface.
• Do not apply salt, aggressive chemicals or abrasive cleaners if the material is not compatible.
• Do not cover drains, gullies or expansion joints with rugs, planters or fixed objects.
• Keep children and pets under supervision on wet or icy surfaces and during installation or curing.
• Do not drill, cut or modify structural elements of decking or joists/battens without understanding their function and the manufacturer's instructions.