Main risks

• Cuts from sharp edges on profiles, trims and freshly cut pieces.
• Trips and falls caused by misaligned, loose or protruding pieces.
• Detachment due to insufficient fixing or poorly cured adhesive.
• Damage to hidden cables or pipes when drilling or nailing into walls or floors.
• Inhalation of dust and flying debris when cutting; tool noise.
• Skin or eye irritation from adhesives and sealants; fumes in poorly ventilated spaces.
• Injuries when handling long or heavy lengths (knocks, finger pinches).
• Moisture damage to water-sensitive skirting boards (swelling, mould) if there are leaks.
• Slip hazard at step edges if the profile sits proud or lacks full contact.

Safe use

• Measure and dry-fit each piece before fixing; check that nothing is left protruding.
• Wear cut-resistant gloves, safety goggles and a dust mask when cutting or sanding.
• Cut on a stable surface, securing the piece firmly; deburr the edges after cutting.
• Ventilate the area when applying adhesives or sealants; avoid contact with skin and eyes; clean excess as directed by the manufacturer.
• Before drilling, check for possible hidden services and mark points; select a drill bit and fixing appropriate to the substrate.
• Respect drying and curing times before walking on, cleaning or subjecting the installed pieces to load.
• On stairs and transitions, ensure the profile sits flush and is firmly fixed; check the fixing before use.
• Remove protective films and leftover packaging after installation to prevent slips and stains.
• Keep the work area tidy and clearly marked; remove offcuts and shavings immediately.

Storage and maintenance

• Store lengths horizontally on a flat, dry, dust-free surface to prevent warping and knocks.
• Protect from direct moisture and sudden temperature changes, especially for wood-based materials.
• Keep in its packaging until installation; do not stack with excessive weight.
• Clean with a soft cloth and neutral detergent; avoid strong solvents, abrasives or metal scouring pads.
• Periodically check fixing and sealing; readjust or re-adhere if any looseness or movement appears.
• Wipe up water splashes immediately and clean joints to prevent mould or swelling.
• Replace pieces that are damaged, deformed or with raised edges.
• Store adhesives and sealants tightly closed, in a cool, ventilated place; observe expiry dates.

Restrictions of use

• Do not use skirting boards or profiles as a step, climbing aid, structural element or to hang loads.
• Do not install on dirty, damp, dusty or greasy surfaces, nor on unstable substrates.
• Do not cut or drill without proper clamping, nor with unsuitable tools or dull blades.
• Do not use in areas of continuous water exposure if the chosen material is not designed for it.
• Do not leave loose pieces in walkways, nor uncured adhesives within reach of children or pets.
• Do not mix incompatible adhesives or sealants; always follow the manufacturer’s instructions for the product used.
• Do not block floor expansion joints when finishing with profiles; respect the clearances required by the flooring system.
• Keep small parts, end caps and screws out of the reach of children (risk of ingestion).