Main risks

• Cuts, lacerations and punctures from the blade edge and tips.
• Pinch points at the pivot or when closing the blades.
• Ejection of fragments when cutting cable ties, hard plastics or other materials that may fly off.
• Slips when cutting slippery or adhesive-coated surfaces, with possible loss of control.
• Hand and wrist fatigue or strain from prolonged use or excessive force.
• Electrical hazard if cutting live cables or near power sources.
• Damage and injuries from carrying or storing with the blades open.

Safe use

• Inspect before use: blades clean, free of nicks and play; smooth opening and closing.
• Choose the appropriate size and type for the material; do not force cuts the tool is not designed for.
• Keep fingers and your other hand out of the cutting line; cut away from your body.
• Hold the material securely; avoid cutting in the air.
• When cutting cable ties or other items that may spring off, hold the end and direct the cut away from you and others.
• Do not use the scissors as a lever, screwdriver, knife, wire stripper or wire cutters.
• Do not walk or run with the scissors in your hand; when passing them, hand them over closed and by the handles.
• Wear cut-resistant gloves and eye protection when the material requires it.
• Keep the work area clear and well-lit to avoid trips or distractions.

Storage and maintenance

• Keep the scissors closed and, if they have a lock or sheath, use it when not in use.
• Store them in a case or dedicated compartment, out of the reach of children and pets.
• Clean and dry them after use to remove dust, adhesives and moisture.
• Lightly lubricate the pivot if recommended by the manufacturer and wipe off any excess.
• Sharpen or replace the blades following the manufacturer’s instructions; stop using them if the blades are misaligned or heavily nicked.
• Check and carefully tighten the joint screw if play develops.
• Avoid impacts and drops; do not store with weight on the blades.

Restrictions on use

• Not suitable for children without adult supervision.
• Do not cut cables or materials connected to the mains or near electrical sources.
• Do not use on materials that are too hard or too thick and require specific tools.
• Do not use if damaged or modified, and do not remove end stops, springs or integrated guards.