Main hazards

• Accidental high-pressure injection of paint or air into the skin, and jet injuries.
• Flying particles, mist and splashes that can damage eyes and skin.
• Inhalation of vapours and aerosols from paints, varnishes or cleaners that may cause irritation, dizziness or sensitisation.
• Fire or explosion due to use of flammable solvents and build-up of static electricity.
• Risk of electric shock with electrical equipment, especially in damp environments or with damaged cables.
• Hearing damage from prolonged exposure to compressor and spraying noise.
• Hose whip or sudden disconnections, and trips caused by cables or hoses on the floor.
• Damage to nearby surfaces and contamination from overspray and spills.

Safe use

• Read and follow the manufacturer's instructions for the equipment and the product to be applied (paint, varnish, cleaner).
• Use appropriate personal protection: sealed goggles or a face shield, chemical-resistant gloves and a mask/respirator suitable for the sprayed material; add hearing protection where appropriate.
• Work in well-ventilated areas; preferably outdoors or with vapour extraction.
• Never point the nozzle at people or at your body; do not attempt to clear blockages with your fingers.
• Before changing nozzles, cleaning or clearing blockages, disconnect from the mains or air supply and relieve system pressure.
• Check that hoses, fittings and nozzles are securely fastened and leak-free before starting.
• Keep flames, sparks and heat sources away; do not smoke during use.
• Use only paints, solvents and cleaners compatible with the equipment; avoid corrosive products or those not recommended by the manufacturer.
• For electrical equipment, keep the cable away from moisture, sharp edges and hot surfaces; unplug by pulling the plug, not the cable.
• When applying flammable products, reduce electrostatic build-up by following the manufacturer's guidance (for example, earthing the equipment or containers where applicable).

Storage and maintenance

• Clean the equipment after each use in accordance with the manufacturer's instructions and using the recommended cleaning agent.
• Depressurise, unplug the equipment and close valves before storage or maintenance.
• Store in a dry, ventilated place away from heat or ignition sources; keep paints and solvents in their containers tightly closed.
• Frequently check nozzles, filters, seals, cables and hoses; replace damaged or worn parts. Do not modify the equipment.
• Protect the unit from dust and moisture; allow parts to dry completely before storage.
• Dispose of soaked rags and waste in appropriate, fire-resistant containers; do not pour residues down the drain.

Restrictions on use

• For use only by adults familiar with its operation; keep out of reach of children and pets.
• Do not use in enclosed spaces without adequate ventilation or near flames, sparks or appliances that could ignite vapours.
• Do not direct compressed air at skin, eyes, clothing or at people or animals; do not use it for body cleaning.
• Do not exceed the equipment's rated pressure or alter nozzles, valves or regulators.
• Do not use incompatible, highly toxic or unknown materials without the specific protections indicated by the manufacturer of the product being applied.
• Do not use the equipment if it is damaged or if you notice strong odours, dizziness or irritation; stop work and ventilate before continuing.
• Do not operate in potentially explosive atmospheres unless the equipment is specifically designed for it.