Main risks

• Tipping over or shifting of the cabinet if not correctly levelled or anchored.
• Finger trapping when closing doors or trays; bumps against corners.
• Deterioration of cable insulation due to pinching, forced bends or rubbing against edges.
• Trips caused by poorly routed cables outside the cabinet.
• Overheating of power strips, adaptors or equipment if ventilation is lacking or dust builds up.
• Electrical hazard from damaged cables, loose plugs or overloaded multi-socket adaptors.
• Falling equipment or objects poorly placed on shelves.
• Unauthorised access to critical cables leading to accidental disconnections.
• Damage from moisture, condensation or nearby spills.

Safe use

• Assemble according to the product instructions, check stability and anchor to the wall or floor where appropriate.
• Place the heaviest items on the lower shelves and distribute the load evenly.
• Route cables through cable pass-throughs, leaving slack at doors and hinges; avoid tight bends and pinching.
• Keep power lines separate from data and audio lines where possible.
• Allow space for internal ventilation; do not obstruct grilles or air outlets of power strips, chargers or routers.
• Use power strips and extension leads within their rated capacity and avoid daisy-chaining them.
• Disconnect the power before reorganising cabling, cleaning or moving the cabinet.
• Secure cables with cable ties or hook-and-loop straps without over-tightening; label them for easy identification.
• Keep the interior free of liquids; clean up any nearby spills immediately.
• Check that doors and trays close without rubbing against or pulling on the cables.

Storage and maintenance

• Position the cabinet in a dry, stable and well-ventilated location, away from sources of heat and moisture.
• Leave clearance around it, especially at the rear and top, to aid heat dissipation.
• Periodically remove dust from the interior and grilles with a soft cloth or a low-suction vacuum; avoid abrasive products.
• Regularly check the condition of cables, plugs and power strips; replace any that show wear, cuts or abnormal heating.
• Periodically check screws, hinges, levelling feet and anchor fixings; re-tighten if necessary.
• Do not place excessive weight on the top of the cabinet.
• Before moving it, empty it as far as possible and secure or remove cabling so it does not snag.

Restrictions of use

• For indoor, dry areas; not suitable for outdoor use or areas with condensation or splashes unless expressly stated by the product.
• Do not use as a step, seat or support; do not hang from doors or trays.
• Do not exceed the maximum load indicated for the unit, shelves or drawers.
• Do not make electrical splices or carry out cable repairs inside the cabinet.
• Avoid charging multiple devices in an enclosed space without adequate ventilation.
• Do not store liquids, flammable aerosols or heat sources inside the cabinet.
• Keep out of reach of children, or lock with a key if there is a risk of tampering.
• Do not position the cabinet so that it blocks corridors, exits or walkways.