Main risks

• Bicycle falls due to insufficient securing or exceeding the load capacity of the stand or bike rack.
• Detachment of wall/ceiling anchors or tipping of floor stands, with a risk of impacts and damage.
• Pinching of fingers and hands when closing clamps, rails and adjustment mechanisms.
• Damage to the vehicle or to third parties when driving with a bike rack due to loss of load, reduced visibility or interference with lights and number plate.
• Bumping into protruding parts of the stand in walkways and snagging on clothing or backpacks.
• Degradation of straps, webbing and plastic parts from sun, rain or salt, which can reduce their strength.
• Risk of impact with obstacles when carrying bicycles on the roof (garages, toll booths, barriers) and exposure to vehicle heat sources with rear-mounted bike racks.

Safe use

• Check the system is compatible with your bicycle (total weight, geometry and tyre width). E-bikes typically require a higher load capacity.
• Follow the manufacturer's instructions for assembly and installation. Use all intended attachment points; do not improvise with straps or knots.
• Adjust and tighten fasteners, straps and knobs until the bicycle is firm, with no play, avoiding crushing frames or delicate components.
• Before each use, check the condition of straps, buckles, rails and anchors/fixings. Replace any worn or cracked items immediately.
• On car-mounted bike racks, distribute the weight evenly, space the bicycles to prevent rubbing and protect contact points.
• Ensure you do not obstruct the lights or number plate, and that no moving part of the vehicle is impeded.
• If using a roof-mounted bike rack, note the overall height and take extra care when entering garages and low-clearance areas.
• Avoid positioning the bicycle near the exhaust or other heat sources. Check the securing after the first few kilometres and during long stops.
• For wall/ceiling anchors, use fixings suitable for the surface material and verify their solidity before hanging the bicycle.
• Position supports at a height that allows manoeuvring without overexertion. For heavy bicycles, ask for help to lift them safely.

Storage and maintenance

• Store stands and bike racks in a dry, sheltered place when not in use. Removing the bike rack from the car reduces wear and fuel consumption.
• Rinse with fresh water after exposure to mud or salt and dry metal parts thoroughly to minimise corrosion.
• Periodically inspect fasteners, play, cracks and corrosion. Replace deteriorated straps, rubber parts and padding.
• Lubricate moving points and latches where appropriate for the product, avoiding lubricant on friction/grip surfaces that need to hold.
• For fixed installations, check anchor tightness after the first few weeks of use and regularly thereafter.
• Keep the product manual accessible and store small parts and tools out of the reach of children.

Usage restrictions

• Do not exceed the maximum load or the number of bicycles specified by the manufacturer.
• Do not use the system with bicycles that are incompatible due to size, frame shape or weight, nor fit additional accessories that increase the load beyond approved limits.
• Do not use the stand or bike rack if it shows deformation, cracks, severe rust or damaged straps.
• Do not install anchors on weak or unsuitable surfaces (hollow walls without reinforcement, railings or lightweight furniture).
• Do not drive with loose items, tarpaulins or ropes that could come loose in the wind. Avoid keeping the bike rack mounted when it is not transporting bicycles.
• Do not allow children to play, hang from or tamper with catches and levers. Keep fingers away from pinch points when opening or closing.
• Do not press cables, brake discs or fragile components with the straps or clamping arms; use the support points recommended by the product.