Main risks

• Basin falling due to inadequate fixing, unsuitable wall, or loosening over time.
• Injuries from handling heavy or sharp-edged parts, and finger entrapment during adjustment.
• Damage to tiles or the wall when drilling, with possible fragment break-off.
• Accidental drilling into hidden pipes or cables.
• Corrosion or deformation of brackets and fixings in damp or humid environments, resulting in looseness.
• Instability of the assembly if the brackets are not compatible with the type and weight of the basin.

Safe use

• Check that the brackets are compatible with the basin and observe the maximum load specified by the manufacturer.
• Check the condition of the wall and use fixings appropriate to the material (brick, concrete, reinforced panel, etc.).
• Before drilling, locate any pipes and wiring; protect the tiles and keep the area clear.
• Wear protective gloves and safety glasses when handling parts and when drilling.
• Carry out the installation with the help of another person to support and level the basin while it is being fixed.
• Tighten evenly without over-forcing, ensuring there is no play and that the assembly is stable.
• If moving a basin that is already installed, turn off the water supply and dismantle carefully to avoid damage.

Storage and maintenance

• Store the brackets and fixings in a dry, ventilated place, in their packaging to prevent impacts and corrosion.
• Keep all parts together and do not lose washers, spacers or protective caps.
• Clean with a dry or slightly damp cloth; avoid abrasive or corrosive products.
• Periodically check the tightness of the fixings and the condition of the brackets (rust, deformation) and the wall (cracks, detachment).
• After an impact, overload or unusual noises, check the fixing and readjust if necessary.
• Replace any damaged or missing part with compatible spares of the same model.

Usage restrictions

• Do not use the brackets or the basin as a step, a bar to hang from, or to support additional loads.
• Do not install on walls with active damp, in poor condition, or that do not ensure a firm fixing.
• Do not modify, bend or drill the brackets; do not mix parts from different models or grades.
• Do not exceed the recommended load or hang heavy objects from the basin.
• Avoid prolonged contact with corrosive chemicals or highly saline environments.
• Keep children and pets away during installation and prevent them from hanging from the basin.
• If you have no experience with load-bearing wall installations, consider seeking assistance from a qualified professional.