Main risks

• Flammability and fire risk in solvent-based products and their vapours.
• Irritation of eyes, skin and respiratory tract from vapours, splashes or aerosols.
• Potentially harmful sanding dust when preparing old surfaces.
• Slippery surfaces while the varnish or protective finish is wet.
• Falls when working at height (ladders, scaffolding) or on uneven outdoor surfaces.
• Permanent staining on floors, stone or metal due to drips and splashes.
• Undesirable reactions when combining incompatible products (water/solvent-based, stains, primers).
• Risk of spontaneous combustion in rags soaked with oil-based products.
• Damage to plants, lawns or aquatic life due to poorly managed spills or rinsing.

Safe use

• Read and follow the instructions on the container; carry out a test in a low-visibility area to verify compatibility and finish.
• Work with good ventilation; indoors, ensure cross-ventilation and avoid enclosed spaces without air renewal.
• Wear chemical-resistant gloves, safety goggles and, if there is sanding dust or vapours, an appropriate respirator.
• Keep sources of ignition away: do not smoke and extinguish open flames, eliminate sparks and switch off equipment that could ignite vapours.
• Prepare the surface clean, dry and free of dust; remove loose paint or varnish by sanding and vacuuming.
• Avoid applying in rain, frost, dense fog, strong wind or intense direct sunlight; observe drying and recoat times.
• Protect adjacent areas with plastic sheeting and tape; control drips and prevent them from reaching drains or porous floors.
• Apply with tools in good condition; if spraying, increase respiratory protection and control spray mist.
• Do not eat or drink while working; wash your hands and exposed skin when finished.
• Cordon off the area and keep children and pets away until fully cured.

Storage and maintenance

• Store the container tightly closed, upright, in a cool, dry, ventilated place away from heat, sparks and direct sunlight.
• Protect from extreme temperatures; some products can be damaged by frost or excessive heat.
• Keep out of reach of children and pets; do not decant into food or drink containers.
• Clean tools as directed by the manufacturer and collect waste; do not pour leftovers or solvents down the drain.
• Rags soaked with oil-based products: lay them out to air-dry outdoors or submerge them in water until safe disposal; do not leave them piled or crumpled.
• Clean the rim of the container before closing to prevent crusting and ensure a proper seal.
• Periodically inspect treated exterior surfaces and reapply when wear, loss of repellency or cracking is observed.
• Store separately from oxidisers, acids or sources of sparks and avoid prolonged exposure to moisture.

Restrictions on use

• Not suitable for surfaces in direct contact with food, drinking water or aquariums, unless expressly stated by the product.
• Do not use in areas of continuous immersion (pools, ponds) or on damp wood or where visible mould is present.
• Do not apply near open flames, sparks, heat-generating equipment or while smoking.
• Do not mix or dilute with products not recommended by the manufacturer (petrol, unspecified alcohols, unsuitable solvents).
• Do not apply on very hot or frozen surfaces or during persistent rain or dew.
• Do not pour residues onto the ground, gardens or drains; dispose of leftovers and containers through appropriate collection points.
• Do not use on toys or objects that may be sucked or chewed by children or pets, unless specifically indicated.
• For adult use only; when working at height, use a stable ladder and, where possible, work with assistance or supervision.