Main risks

• Potentially harmful vapours that can cause eye and respiratory irritation, headaches or dizziness in poorly ventilated spaces.
• Flammability in many solvent-based enamels: risk of ignition from flames, sparks or hot surfaces.
• Direct contact with skin and eyes may cause irritation or sensitisation.
• Spills that create slippery floors and stains that are difficult to remove.
• Build-up of vapours in low-lying areas which, in extreme cases, may contribute to flash fires.
• Incompatibilities with previous coats or certain materials, which can cause peeling, blistering or the release of strong odours.
• If in aerosol format: pressurised container with a risk of bursting due to heat or puncture.

Safe use

• Work in well-ventilated areas; ensure airflow and, if necessary, use appropriate respiratory protection.
• Keep all sources of ignition away: do not smoke and avoid sparks, flames and tools that may become excessively hot.
• Wear protective gloves, close-fitting goggles and long-sleeved clothing to minimise contact with skin and eyes.
• Prepare the surface clean, dry and free from dust or grease to reduce unnecessary emissions and improve the result; carry out a test in an inconspicuous area if you are unsure about compatibility.
• Open the container carefully and keep it closed when not in use to limit the release of vapours and prevent spills.
• Avoid eating, drinking or smoking during application; wash your hands and any exposed areas afterwards.
• Remove spills immediately with non-combustible absorbent material and ventilate the area.
• If using aerosol enamel, spray at the recommended distance, away from your face, and never towards flames or very hot surfaces.

Storage and maintenance

• Store containers tightly closed, upright, in a cool, dry and well-ventilated place, away from sources of heat and direct sunlight.
• Avoid extreme temperatures; do not freeze water-based enamels or expose containers to high heat.
• Keep products out of reach of children and pets; do not decant into drinks bottles or unlabelled containers.
• Clean rims and lids before closing to ensure a proper seal and reduce skin formation.
• Allow rags or cloths soaked with enamel or solvent to air-dry, laid out in a safe place, or place them in a metal container with a sturdy lid; do not pile them up.
• Before reusing an opened container, stir gently and check the odour and appearance; if you detect any anomalies, avoid using it indoors.
• Dispose of residues and used solvents through appropriate collection points; do not pour them down the drain or onto the ground.

Restrictions on use

• Do not apply near flames, sparks, operating appliances that generate heat or very hot surfaces.
• Do not use in enclosed spaces without adequate ventilation, nor for prolonged periods without breaks in fresh air.
• Do not mix with solvents or additives not recommended by the manufacturer, nor combine with other paints without checking compatibility.
• Do not use on surfaces in direct contact with food or drinking water unless the product explicitly states its suitability.
• Not suitable for use by children; keep inexperienced teenagers under supervision.
• People with asthma, respiratory allergies, very sensitive skin, or those who are pregnant or breastfeeding should minimise exposure and avoid inhaling vapours.
• In aerosol format: do not pierce or burn the container, even when empty, and do not expose it to high temperatures.