Manufacturer Information

The manufacturer information includes the address and contact details linked to this product.

FAN EUROPE LIGHTING

Via Monzoro 46

20007 Cornaredo

Italy

Usage Warnings

Floor Lamps

Warnings and safety precautions

Main risks

  • Tip-over of the lamp due to an unstable base or impacts, with risk of injury and breakage.
  • Burns from contact with bulbs or parts that can become hot during use.
  • Electrical hazard from damaged cables, faulty plugs or use in damp areas.
  • Fire risk from covering the lamp, placing it too close to textiles or other combustible materials, or using bulbs of unsuitable wattage.
  • Trip hazards from cables crossing walkways or poorly secured.
  • Cuts from a broken shade or glass diffusers.
  • Damage caused by children or pets pulling the cable or pushing the lamp.
  • Overheating due to dust build-up on the shade, lampholder or ventilation openings.

Safe use

  • Place the lamp on a firm, level floor, leaving clearance from curtains, sofas and other objects.
  • Use only bulbs with the cap type and maximum wattage recommended on the product label.
  • Do not cover the bulb or the shade, and allow air to circulate to dissipate heat.
  • Assemble the lamp following the instructions, ensuring the stem and base are securely fixed and straight.
  • Switch on and off with dry hands; plug in and unplug by holding the plug, never pulling the cable.
  • Avoid dimmer switches or accessories if the lamp or the bulb are not compatible.
  • Do not overload power strips or extension leads; distribute the load across suitable sockets.
  • Route the cable along the skirting board or secure it so it does not cross walkways; do not run it under rugs.
  • Allow it to cool completely before changing the bulb or handling parts near the light source.

Storage and maintenance

  • Clean the lamp when unplugged and cool, using a dry cloth or one slightly dampened on the shade if the material allows; avoid abrasive products and any contact of water with electrical parts.
  • Remove dust from the shade and lampholder regularly to prevent overheating.
  • Periodically inspect the cable, plug and switch; if you notice cuts, sharp kinks or looseness, stop using it until the damaged component is replaced.
  • Replace blown bulbs with compatible models and fit them securely.
  • To move it, hold it by the base and stem; do not pull the cable or drag the lamp.
  • If storing, keep it upright or protected to avoid deformation and impacts, in a dry place away from moisture.
  • Avoid prolonged exposure to direct heat sources or intense sunlight that could discolour or deform the shade.

Restrictions of use

  • For dry indoor use, unless the manufacturer expressly states it is suitable for outdoor or damp areas.
  • Keep out of reach of young children and pets or use additional securing systems; it is not a toy or a climbing aid.
  • Do not use it if any parts are missing, if it is unstable or if it shows abnormal wobbling.
  • Do not place the lamp against curtains, clothing or other flammable materials, nor cover it with fabrics to dim the light.
  • Do not modify the cable, plug, lampholder or structure; do not hang objects from the shade or stem.
  • Avoid placing it in very narrow corridors or points of passage where it could be knocked or cause trips.
  • Do not use the lamp in bathrooms, on balconies or terraces, or near sinks unless the model is designed for it.