Main risks

• Electric shock when installing, connecting or reconfiguring tracks, profiles and joiners with the circuit energised.
• Overheating or fire due to overload, loose connections, or covering profiles without adequate ventilation.
• The track or the luminaires falling due to insufficient fixings, an unsuitable surface or excessive weight.
• Cuts or punctures from sharp edges of metal profiles and when cutting or deburring parts.
• Damage from moisture or splashes if products not suitable for damp areas or outdoors are used.
• Sparks or short circuits due to pinched or stripped cables, or poorly seated connectors.
• Finger trapping when snapping luminaires or joiners into the track.
• Risk to children from small parts, caps and loose screws.
• Falls from height during installation if unstable ladders are used.

Safe use

• Switch off the power and verify that there is no voltage before installing, cleaning or changing configurations.
• Use connectors, joiners, diffusers and luminaires compatible with the track or profile system specified by the manufacturer.
• Do not exceed the load, length or number of luminaires recommended for each run of track.
• Secure the track or profile to a solid surface with fixings appropriate for the wall or ceiling material; ensure there is no looseness.
• Insert and lock the luminaires following the indicated orientation; check they are secure before energising.
• Keep cables free of tension, pinches and twists; protect ends with ferrules or insulating end caps.
• Do not connect or disconnect components with the circuit energised or with wet hands.
• Allow space for heat dissipation; do not cover profiles with textiles, foams or other insulators.
• In damp areas or outdoors, use only models with appropriate protection and apply the specified seals.
• If you need to cut profiles, use appropriate tools, gloves and goggles; remove burrs before assembly.
• Work at height with a stable ladder and, if possible, with another person to support long sections.

Storage and maintenance

• Store products in a dry, ventilated place, away from moisture, excessive dust and sources of heat.
• Keep screws, joiners and accessories in labelled bags or boxes to avoid loss and mixing.
• Do not stack items on diffusers or covers to prevent warping or cracking.
• Dust with a dry or slightly damp cloth; avoid abrasive products or solvents.
• Disconnect the power before cleaning or readjusting luminaires and joiners.
• Periodically check fixings and connectors; retighten screws and replace damaged parts (cracked diffusers, deformed connectors, frayed or stripped cables).
• If you notice a burning smell, discolouration or abnormal heating, switch off and inspect the installation before using it again.

Restrictions of use

• It is not a load-bearing element: do not hang objects from the track or profile, and do not lean on them.
• Do not use in areas with pressurised water jets, continuous steam or corrosive environments unless the product is designed for it.
• Do not mix components from different systems unless compatibility is specified.
• Do not modify or drill areas with conductors or contacts of the track; do not bypass protective devices or adapt connectors.
• Do not cover the assembly with insulating materials, nor recess it without providing the required ventilation.
• Keep out of reach of children and pets; supervise the area during installation.
• Installation and electrical connection must be carried out by suitably knowledgeable persons; if you lack experience, seek help from a qualified professional.