Tailor-made sturdy aluminium door in a customisable Toro colour Gardengate

Product description:

• Outdoor door that is not only easy to handle and clean, but also lightweight.
• Made of aluminium, which makes it corrosion resistant and 100% recyclable.
• Thermo-lacquered coating gives the aluminium great durability.
• The default colour of this door is anthracite grey (RAL 7016).
• The length of the door opening can be chosen from 100 cm to 150 cm.
• The height of the door can be chosen from 100 cm to 200 cm.
• Includes support posts.
• Assembly instructions included.
• This gate can be combined with the Toro swing gatewith the same aesthetics and characteristics of the series.
• Important:
  • The drop-down option "Door opening" indicates which way the door will open. For example, if you select left door opening, the door will open to the left (see diagram in the fifth image).
  • The door only opens inwards and not towards the street.

The following accessories are included for easy installation:

• Latch.
• Lock.
• Hinges with adaptable positions.
• Door stops.
• Cylinder and keys.

Manual to choose the correct measurements:

• Measurement of the width of the opening: This refers to the total space between the two walls where we will install the gate/barrier with the support posts. Therefore, it does NOT refer to the width of the barrier itself, but to the space/hole where it will be installed. To obtain this measurement it is important to measure our opening at 3 points: the upper width of the opening, the width of the middle and the width of the lower part (see diagram in the third photo with the labels 1/2/3). It is important that the value to be entered is the lowest value of these 3 measurements. The ideal (if the walls are well constructed) is that the measurement of the 3 points is equal, exact or that its variation is not too exaggerated. It must be taken into account that if the wall is not well levelled, it will not be possible to install the product.

• Measurement of the height of the door/barrier: This refers to the total height that we want for the door/barrier (detailed in the fourth photo with the label "A"). It is very important to take into account that 3 cm of margin must be left at the bottom (detailed in the fourth photo with the label "MS") and 7 cm at the top for its correct installation. The manufacturer recommends leaving a minimum of 10 centimetres at the top for the correct anchoring of the door/barrier (detailed in the fourth photo with the "EM" label).

The following features can be customised:

• Door opening (see diagram in the fifth picture):
  • Left (front view, option 1).
  • Right (front view, option 2).
    
    

• The available colours are:
  • Traffic white (RAL 9016/70).
  • Light ivory (RAL 1015).
  • Moss green (RAL 6005).
  • Anthracite grey (RAL 7016).
  • Sepia brown (RAL 8014).
  • Purple red (RAL 3004).
  • Sapphire blue (RAL 5003).
  • Deep black (RAL 9005).
  • Quartz grey (RAL 7039).

If you require any other colour from the RAL chart, please contact us.

• Possibility of adding an electric lock.
  • Electric lock with hinged profile on the whole height of the door, which gives a better aesthetic appearance.
  • With this lock you will be able to open the door from inside your house.
  • When using this lock, the handle will be fixed on the outside, only for decorative purposes, and can only be opened with a key. From the inside, the handle can be operated and opened without a key.
  • Only the lock is included. In order to be able to use it, it must have the necessary electrical installations and equipment for its operation.

SKU: DE26_p-toro, ACCGG-186

• Door Opening : Left inwards, Right inwards.
• Door Colour : RAL 6005 STR, RAL 3004 STR, RAL 5003 STR, RAL 7016 STR, RAL 8014 STR, RAL 9005 STR, RAL 9016/70, RAL 1015 STR, RAL 7039 STR.
• Lock Type : Standard, Electric lock.