Roll over image to zoom in
Lightweight single-leaf outdoor gate made out of aluminium with customizable colour Aspe Gardengate
Gardengate - sm12_P-aspe
New product
Product details
- Lightweight, single-leaf, outdoor pedestrian gate. It is easy to clean, and handle.
- Made out of aluminium, so it is corrosion-resistant, and 100% recyclable.
- Powder coated finish, provides aluminium great durability.
- The default colour of this door is anthracite grey (RAL 7016).
- Gate installation space can be chosen between 100cm and 150cm.
- Gate's height can be chosen between 100cm and 200cm.
- The gate is suited for automation.
- Assembly instructions, and support posts are included.
- This gate can be combined with an Aspe outdoor entrance gate, with the same design, colours, and features of the collection.
- Important:
- The drop-down option ‘Door opening’ indicates in which direction the door will open. For example, if you select left door opening, the door will open to the left (see diagram in the fifth image).
- The door only opens inwards and not towards the street.
- Door handle.
- Key lock.
- Hinges, with adapting positions.
- Door caps.
- Lock cylinder, and keys.
- Measuring the gate's width: It refers to the total space between the two walls where the gate will be installed with the support poles. Therefore, this measurement does NOT represent the width of the gate itself, it represents the width of the space where it will be installed. In order to get this measurement, it is key to measure the space in 3 points: the upper width, the middle width, and the lower width (see the scheme in the third image with the marks 1-2-3). It is important that the value you select for your order is the lowest of the 3 measurements. It is ideal (if the walls are properly built) that the measure of the 3 points is the same, exact, or that its variation isn't too big. You must consider that if the wall is not levelled, you will not be able to install the product.
- Measuring the gate's height: It refers to the total height we wish for the gate (see the fourth image, marked ''A''). Very important to consider that 3cm of margin must be left on the lower side (see the fourth image, marked ''MS''), and 7cm of margin on the upper side for its correct installation. The manufacturer recommends leaving a minimum of 10cm on the upper side for the gate's correct anchoring (see the fourth image, marked "EM").
- Opening side (see the scheme on the fifth image):
- Left (seen from the front, option 1).
- Right (seen from the front, option 2).
- Available colours:
- Traffic white (RAL 9016/70).
- Light ivory (RAL 1015).
- Moss green (RAL 6005).
- Anthracite grey (RAL 7016).
- Sepia brown (RAL 8014).
- Purple red (RAL 3004).
- Sapphire blue (RAL 5003).
- Jet black (RAL 9005).
- Quartz grey (RAL 7039).
Possibility of adding an electric lock.
- Electric lock with hinged profile on the entire height of the door, which gives a better aesthetic appearance.
- With this lock you will be able to open the door from the inside of your house.
- When using this lock, the handle will be fixed on the outside, only for decorative purposes, and can only be opened with a key. From the inside, the handle can be operated and opened without a key.
- Only the lock is included. In order to be able to use it, it must have the necessary electrical installations and equipment for its operation.
Payment methods and plans
